Press the Power button .
Kill it.
Unfortunately, there is no way to save unsaved video on a Panasonic SDR-H85 Camcorder if the error message wants you to turn it off and back on.
The camera will not turn on.
What
To turn on a Jazz camcorder, locate the power button, which is usually found on the side or top of the device. Press and hold the power button until the screen lights up or you see the Jazz logo. If the camcorder doesn’t turn on, ensure that the battery is charged and properly inserted.
It means micro sd card not present :)
When you power the flip ultra on hold the red record button to get to the settings. Go through the settings at it will come up. Just choose to keep it off.
Some camcorders have a switch to turn night shot on and off; others switch automatically depending on light level.
When your JVC mini DV camcorder displays "condensation operation paused," it indicates moisture inside the device. To fix this, turn off the camcorder and remove the tape, battery, and any other removable parts. Allow the camcorder to dry in a warm, dry place for several hours, and avoid using it in humid environments. Once completely dry, reassemble and power it on to check if the issue is resolved.
This depends on what your most concerned with. If it's picture and sound quality, then you'd be better off with a digital camcorder. If it's affordability of the unit and accessories (tapes, batteries, etc.) then this Hi8 camcorder might be the better pick for you.
The "MSDC" message on your Vivitar Vivicam 8025 indicates that the camera is in Mass Storage Device mode, which typically occurs when it's connected to a computer or when there's an issue with the memory card. To resolve this, try removing the memory card and reinserting it, or ensure the camera is not connected to any USB devices. If the problem persists, you may need to reset the camera or format the memory card.
An HDTV camcorder is the highest quality consumer camcorder available.