first optical smoke / heat detector to second optical smoke/heat detector maximum distance.
The smoke detector is beeping because it is detecting smoke or a low battery.
Turn off power to the area where the smoke detector will be installed. Remove the old smoke detector, if applicable. Connect the new smoke detector to the existing wiring. Mount the smoke detector on the ceiling or wall using screws. Restore power and test the smoke detector to ensure it is functioning properly.
actually no, the smoke detector was not proposed for a mission
Personally, I have no idea what "smoke detector tape" is.
Most smoke detectors work either by optical detection (photoelectric) or by physical process (ionization), while others use both detection methods to increase sensitivity to smoke. For the alarm part, in many single family detached and smaller multiple family housings, a smoke alarm is often powered only by a single disposable battery. An optical detector is a light sensor. When used as a smoke detector, it includes a light source (incandescent bulb or infrared LED), a lens to collimate the light into a beam, and a photodiode or other photoelectric sensor at an angle to the beam as a light detector. In the absence of smoke, the light passes in front of the detector in a straight line. When smoke enters the optical chamber across the path of the light beam, some light is scattered by the smoke particles, directing it at the sensor and thus triggering the alarm. An ionizing detector type of detector is cheaper than the optical detector; however, it is sometimes rejected because it is more prone to false alarms than photoelectric smoke detectors. It can detect particles of smoke that are too small to be visible. It includes about 37 kBq or 1 µCi of radioactive americium 241, corresponding to about 0.3 µg of the isotope. The radiation passes through an ionization chamber, an air-filled space between two electrodes, and permits a small, constant current between the electrodes. Any smoke that enters the chamber absorbs the alpha particles, which reduces the ionization and interrupts this current, setting off the alarm. From Wikipedia.
is a smoke detector like a sense organ
is a smoke detector like a sense organ
A smoke detector beeps to alert you when it detects smoke or fire, which could be a sign of danger in your home.
A smoke detector chirps to indicate that its battery is low and needs to be replaced.
A photoelectric smoke detector uses a light sensor and a light source to detect smoke particles in the air. When smoke enters the detector, it scatters the light, triggering the alarm.
Detector converts optical signal to electric signal