0
What else can I help you with?
Melting point for LPG?
what is lpgs melting point
What is loading and flooding point in packed column?
Flooding point is the point where the liquid overflows because of the high gas velocity coming from the bottom. Loading point is velocity at which absorption starts taking place.
Where to pour bleach in a Rudd rheem air conditioner model number UBHC 17J11NFD to remove clog?
Bleach will not remove a clog, it is only for routine disinfecting of the drain line. For a clog blow out the line with compressed air. There should be access to do this somewhere inside at the airhandler but if not you can blow it in the opposite direction at the drain lines termination point. Or call a pro in to do it correctly.
What is the relationship between flash point and initial boiling point in diesel?
The flash point of diesel fuel is the lowest temperature at which its vapors can ignite in air, while the initial boiling point is the temperature at which the first portion of the liquid begins to evaporate. Generally, diesel has a flash point that is higher than its initial boiling point, indicating that it requires a higher temperature to ignite compared to the temperature at which it starts to vaporize. This relationship is crucial for safety and storage considerations, as it affects handling and potential fire hazards. In essence, the flash point helps define the flammability risk associated with the fuel under different temperature conditions.
Is Aniline point is a property of lpg?
no
Do contour lines crossings a small stream point up-stream or downstream?
Contour lines crossing a small stream will point upstream as they represent the elevation change of the terrain. This means that the elevation increases as you move in the upstream direction.
How do contour lines bend when crossing a stream?
Because we know that water cannot flow uphill, the flow must go from higher contours to lower ones.
What do v shaped contour lines indicate when going down hill?
V-shaped contour lines on a topographic map indicate a valley or a stream flowing downhill. The point of the "V" typically points upstream, while the open end points downstream. As you move downhill, these lines converge, indicating a decrease in elevation and the presence of a sloping terrain. This pattern helps identify the direction of water flow and the shape of the landscape.
How must contour lines bend on a topographic map to indicate a stream valley?
Contour lines will bend and point upstream to form a "V" shape when crossing a stream valley on a topographic map. The V-shape indicates the direction of the stream flow and shows the gradual slope of the valley.
What are the contour line rules?
- Contour lines never cross. All lines on a contour line represent one elevation.- The spacing of contour lines depends on slope characteristics. Contour lines that are close together show a steep slope. Contour lines that are far apart show a gentle slope.- Contour lines that cross a valley or a stream are V shaped. The C points toward the area of the highest elevation. If a stream or river flows through the valley, the V points upstream.-The tops of the hills, mountains, and depressions are shown by closed circles. Depressions are marked with short, straight lines inside the circle that point down slope to the depression.
Why do contour lines point uphill when they cross a stream?
Contour lines point uphill when they cross a stream due to the topographic representation of elevation. As water flows downhill, the contour lines indicate changes in elevation; when they intersect a stream, they form a V shape that points upstream. This orientation shows that the higher land lies in the direction of the point of the "V," indicating that the elevation increases as you move away from the stream. Thus, the V shape helps visualize the relationship between the stream and the surrounding terrain.
What are upstream and down stream valves?
Upstream and downstream valves refer to the positioning of valves in relation to the flow of fluid in a piping system. Upstream valves are located before a specific point in the system, controlling the flow entering that point, while downstream valves are positioned after that point, regulating the flow exiting it. These designations help in maintenance, troubleshooting, and ensuring proper fluid control within the system.
What do V-shaped contour lines indicate when the point uphill?
V-shaped contour lines indicate a valley or a depression when the point is uphill. The V-shape of the contour lines indicates that the elevation is decreasing in that direction, forming a valley or depression.
How can you tell from the map which point on the hill is the highest?
Look for the point where contour lines are closest together or where the numbers on the contour lines are highest. This indicates the highest elevation on the hill.
Every point on a contour line is at a different elevation?
Every point on a given contour line is at the same elevation. Neighboring contour lines are at different elevations.
What do v shaped contour lines indicate when they point donwhill when they point uphill?
When V-shaped contour lines point downhill, they indicate a valley or depression on the map. When they point uphill, they indicate a ridge or hill on the map.
Can a contour line connect a point of 100 feet to a point with 110 feet?
No. Contour lines connect points of equal height.
