Divide by 0.086 simple ya?
The price of a production line for 1,000,000 metric tons of cement per year can vary widely based on factors such as technology, location, and manufacturer. Typically, the cost can range from $30 million to $100 million or more. Additional expenses for land, infrastructure, and operational costs should also be considered. It's advisable to consult with equipment suppliers and industry experts for a more accurate estimate based on specific requirements.
Refractory consumption per ton in an induction furnace refers to the amount of refractory material used during the melting process, typically measured in kilograms per ton of metal produced. This consumption can vary based on factors such as the type of refractory used, the operational practices, and the specific characteristics of the charge materials. Generally, the refractory consumption ranges from 5 to 20 kg per ton of metal, depending on the furnace design and operational conditions. Minimizing refractory consumption is essential for cost efficiency and operational effectiveness.
Note: edited for correctness Assuming that you meant ppmw (parts per million by weight), and not ppmv (parts per million by volume); and also that you meant short tons (2000 lbs) and not metric tonnes (1000 kg): x /(500 tons * 2000 lbs/ton + x) = 6/1,000,000 Where x is the amount of odorant in pounds. Solving for x yields: x= 6.000036 lbs for a 6 ppmw (parts per million weight) concentration This shows we can neglect the amount of odorant added since it is insignificant (0.00036 lbs) in the total, and the equation reduces to: x/(500*2000) = 6x10-6 yielding: x=6 lbs for 6ppmw likewise: x=12.001 lbs of odorant for 12ppmw or x=12 lbs for the simple calculation. Important conversion: ppm/1x106= fraction in total
to produce 1 ton of steam how many GCV of coal is required?
Depends on what type of frac sand. White, golden or brown. White at the well head - $300+, golden and brown - $150-250
One metric ton of LPG is equal to approximately 284.3 gallons.
i barrel = ?? Metric tonnes
7.2 barrels are equal to 1 metric ton. So the answer is 360,000 barrels.
at a guess 1,250 litres, petroleum products generally have a density of 0.8kg/litre
Assuming 1 metric ton of crude oil ~ 7.33 barrels them 20 metric tons of crude oil ~ 20 x 7.33 barrels =146.60 barrels of crude oil
One metric ton of LPG is equivalent to approximately 46,452,000 BTU (British Thermal Units). This conversion factor helps in determining the energy content of LPG for various applications such as heating and cooking.
I am going on the assumption you mean "metric" ton. A standard ton is 2000 pounds. A metric Ton is 2205 pounds. 6-8 oil barrels equal a ton. assuming its 8 in this case, that is 250 lbs per barrel. That equals ALMOST 9 barrels of oil (8.82). If we assume is it 6 barrels per ton, than 2000 divided into 6 is 333.33. A metric ton (2205) divided into 333 equals 6.62. A bit over 6and a half barrels of crude oil in your metric ton.
To convert metric tons of jet fuel to barrels, you can use an approximate conversion factor: 1 metric ton of jet fuel is roughly equivalent to 7.5 barrels. Therefore, 125,000 metric tons of jet fuel would be approximately 937,500 barrels (125,000 x 7.5 = 937,500). Keep in mind that this is an estimate and actual values may vary slightly based on the specific density of the fuel.
7.7652
1 metric ton = 2,204.62 pounds Gallons depends on the weight of the fluid.
One metric ton of light naphtha is approximately equal to 7.33 barrels. This conversion can vary slightly based on the specific density of the naphtha, but 7.33 barrels is a commonly used estimate for light naphtha.
Here are some barrels as volume.The problem is, which barrel is meant.barrel (U.S. dry) = 0.115 628 198 985 075 m³barrel (U.S. fluid) = 0.119 240 471 196 m³barrel (petroleum) = 0.158 987 294 928 m³barrel (Imperial) = 0.163 659 24 m³The other problem is metric ton is a weight and no volume.Only for pure water it is easy to convert from the volume in m³ to the weight of metric ton.1 m³ of water is 1 metric ton.