0
What else can I help you with?
What is dzr brass made of?
Dezincification is a process of removing Zinc from the Brass,In potable water containing chlorine the zince from the brass gradually reacts with the chlorine in water leaving rich and porous copper exposed, to prevent this arsenic or tin is added so that the Zinc contain in brass is not exposed and so the copper Regards Ronald pate(Pune,India )
What is the alloy called which is a combination of copper and tin?
Pewter or bronze depending on the ratio of the copper to tin.
Is bronze an alloy of copper and tin?
Bronze is best known as an alloy of copper and tin, but copper alloyed with aluminum, arsenic, manganese, phosphorous, silicon, etc., can also referred to as bronzes.
WHY DID THE IRON ROD KEPT IN COPPER SULPHATE SOLUTION TURNED BROWN AFTER SOMETIME?
The Iron rod(Fe) reacts with the Copper Sulphate. Substitution reaction takes place. Fe+CuSO4--> FeSO4 + Cu
What materials are used in boilers?
steel, copper and iron are the materials that are used in boilers.
Are microorganisms used in the manufacturing of copper wire?
Yes, microorganisms are used in a process called bioleaching to extract copper from ores. These microorganisms help break down the ores and release copper ions, which can then be processed into copper wire.
Strain-stress diagram of copper and steel?
difference between Strain-stress diagram of copper and steel?
What is the process involved in making brass?
Brass is the combination of the metals copper and zinc. Its manufacturing process involves melting, hot rolling, annealing and cold rolling, and finish rolling.
What is quebec's economic activity?
Copper and manufacturing.
Are copper pans all right to cook in if there is a copper tint to the stainless steel?
To manufacture the stainless steel copper bottom utensils with 3% of copper deposit at the bottom of utensil & the grade of stainless steel is J -5 of 22 gauge. What would be the manufacturing cost per kg ? Shall I get the costing analysis of manufacturing process to know this process better.What kind of stainless steel grade have to be used to get best resuts? Ravikumar
What is copper turning?
COPPER TURNINGS - Copper Turnings are the shavings of copper metal (often left after manufacturing of copper goods in factories are used mostly in schools for studying chemical reactions as it provide more surface area for reaction than a piece of copper ). They have the same color as copper (reddish brown).
Can copper be flattened by hammering?
Yes: Being flattening by hammering is a property called "malleability", and copper is one of the highly malleable metals.
How do you make a diagram showing electricity coming from copper coins?
This website does not have the ability to draw and show the diagram.
What is the significance of the Cu orbital diagram in understanding the electronic configuration of copper?
The Cu orbital diagram is significant because it helps us understand the unique electronic configuration of copper. Copper's orbital diagram shows that it has a partially filled d orbital, which is unusual for an element in its group. This explains why copper can exhibit multiple oxidation states and form complex compounds.
Ireland chief manufacturing products?
coil, copper,peat, natural gascoil, copper,peat, natural gas
What is the use of sulfuric acid in printed circuit board manufacturing?
No acid is used.In the subtractive process for making PC boards, one of two etchant salt solutions will be used to remove copper from where traces are not desired:ferric chlorideammonium persulfateIn the additive process for making PC boards, copper will be added where traces are desired by electroplating from a copper sulfate salt solution.
What is the final step in producing copper?
Concentrate must be purified and refined before it yields copper that is ready for manufacturing applications.
