Depends on temperature. For ASTM D323 the RVP of water is ~49.5 mmHg (torr) gauge or ~809 mmHg absolute (assuming standard pressure). FYI - ASTM D323 is measured at 100F.
Reid vapor pressure (RVP) of gasoline is the vapor pressure at 100°F.
2 kpa
Use the Equation of State (EOS) in combination with the Antoine's Equation to determine vapor pressure.
Pressure is an important part in distillation because boiling points of different components to be separated depends on pressure, for normal distillation pressure is kept as 1 atmosphere but for components with high boiling points instead of rasing the temperature pressure is lowered till the vapor pressure of the components to be separated, hence the temperature to be raised becomes less, for example in vaccum distillation.
Condenser pressure in an absorption chiller refers to the pressure within the condenser unit where the refrigerant vapor is condensed into a liquid. It is influenced by the temperature of the cooling medium (usually water or air) used to remove heat from the refrigerant. Maintaining appropriate condenser pressure is crucial for the efficient operation of the chiller, as it affects the overall performance and capacity of the cooling system. High condenser pressure can reduce efficiency and increase energy consumption, while low pressure can lead to inadequate refrigerant flow.
Reid vapor pressure (RVP) of gasoline is the vapor pressure at 100°F.
The typical Reid vapor pressure range in naphtha is between 2 to 15 pounds per square inch (psi). Reid vapor pressure is a measure of the vapor pressure of volatile petroleum products, including naphtha. High Reid vapor pressure indicates increased volatility.
The Reid vapor pressure of LPG (liquefied petroleum gas) typically ranges from 100 to 200 psi (pounds per square inch) at 100°F. Reid vapor pressure is a measure of the volatility of a fuel, indicating its tendency to evaporate.
Chilling the sample in the Reid vapor pressure test helps to reduce the vapor pressure of the volatile components in the sample, making it easier to measure accurately. This allows for more precise determination of the vapor pressure under controlled conditions.
The volatility of gasoline.
The amount of light components in the oil affect the reid vapor vapor pressure. In petroleum products such as gasoline, the amount of butane in the gasoline blend has a strong affect on the Reid Vapor Pressure. To reduce RVP more stripping steam can be added to the product strippers. The fractionation in the debutanizer might also need to be adjusted to affect the RVP.
its just under 0.5 pounds.
The saturated vapor pressure of water at 50 oC is 123,39 mm Hg.
http://www.epa.gov/ttn/chief/ap42/ch07/final/c07s01.pdf page 56
The vapor pressure of water at 10°C is lower than its vapor pressure at 50°C. As temperature increases, the vapor pressure of water also increases because more water molecules have enough energy to escape into the gas phase.
water at sea level has higher vapor pressure
The vapor pressure of pure water at 25 degrees Celsius is 23.8 torr.