answersLogoWhite

0

Answer Titanium is a great alternative for structural material in terms of weight and strength. Titanium is lighter than Steel and much stronger than Aluminum. It has a low heat transfer rate, which makes it useful for high-heat applications. The one major draw-back with titanium is that it retains heat during maching of part during manufacture due to its low heat transfer rate. Titanium has to be machined at 1/5 the rate of steel, even with plenty of coolant applied to the cutting tool. This is one reason a Titanium part is more expensive; if it takes 5 times longer to machine a part, it will be 5 times more costly. The other reason is that Russia has a monopoly on the titanuium resources. Someone asked me which part would be lighter if made for the same load: Steel, Titanium or ALuminum. I analyzed a simple rod under an axial load and determined the minium size of the optimized rod then calculated its weight. The Titanium rod came out 1/3 lighter than the Steel rod. For bending or other load applications, this ratio will vary. The strength ratio can easily be found by ratioing the Young's Moduls and the unit weight. Fatigue-- A few years ago, Titanium did not have very good fatigue properties. The standard titanium alloy was Titanium 6Al-4V. The fatigue S/N curve of this alloy is very steep; it does not flatten out at the higher cycles as Steel S/N curves will do. However, new alloys have been developed that have much better fatigue properties.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Chemical Engineering

What is the chemical formula of zeigler-natta catalyst triethyl aluminiumor titanium tetrachloride?

The Ziegler-Natta catalyst commonly consists of titanium tetrachloride (TiCl₄) and an organoaluminum compound, such as triethylaluminum (Al(C₂H₅)₃). The chemical formula for triethylaluminum is Al(C₂H₅)₃, and for titanium tetrachloride, it is TiCl₄. In the context of the catalyst system, these compounds interact to facilitate the polymerization of alkenes, particularly in the production of polyethylene and polypropylene.


Explain the effect of austenite and ferrite stabilizers?

In steels, alloying elements such as silicon, chromium, molybdenum, aluminum, titanium, niobium, etc., stabilize the (body-centered cubic) ferrite phase. These elements are referred to as ferrite stabilizers. Alloying elements such as carbon, nitrogen, manganese, nickel, copper, etc., stabilize the (face-centered cubic) austenite phase. These elements are referred to as austenite stabilizers.


Water purification using nanotechnology?

Water purification using nanotechnology involves the application of nanomaterials and nanostructures to remove contaminants from water. Nanoparticles, such as silver, titanium dioxide, and carbon-based materials, can effectively trap pollutants, bacteria, and viruses due to their large surface area and unique properties. Techniques like nanoscale filtration and photocatalysis enhance the efficiency of water treatment processes, making them faster and more effective. This innovative approach holds promise for providing clean drinking water and addressing global water scarcity challenges.


What is calcined petroleum coke and there users?

Petroleum coke, also calledpetcoke, is a rocklike leftover of the oil refining process. Energy can be created from petroleum coke, so it is often turned into dry cells and fuels based on the type of coke it is. There are several classifications of petroleum coke, and each one is used to create different substances.Calcined petroleum coke is made when petroleum coke is calcined, or roasted, just below the melting point. This coke is commonly used in the smelting industry for the creation of metals such as titanium, aluminum and steel. This is because calcined coke is used as an anode to produce these metals.The largest single nonfuel use of petroleum coke is in the manufacture of carbon anodes for the aluminum smelting industry which accounts for almost 80 percent of all petroleum coke produced.


Do all oil come from the same refinery?

No, not all oil comes from the same refinery. Crude oil is extracted from various sources around the world and then transported to different refineries, where it is processed into various petroleum products. Each refinery is designed to handle specific types of crude oil and produce particular products, so the origin and refining processes can vary widely. Consequently, the characteristics and quality of oil products can differ based on the refinery and the crude oil source.

Related Questions

What are chemical characteristics of titanium?

See the link below.


What is the material called that is a combination of diamonds and titanium?

The material you are referring to is likely a composite material made from diamond particles embedded in a titanium matrix. This combination offers unique properties such as high hardness from the diamonds and lightweight and strong characteristics from the titanium.


What are the constraints for a titanium bicycle?

Titanium is very flexy compared to steel and aluminium.This means that to get nice ride characteristics out of a titanium frame you need to pick tubing diameter and wall thickness real carefully.


Is titanium oxychloride polar?

Titanium oxychloride, typically represented as TiOCl2, exhibits polar characteristics due to the presence of titanium's oxidation states and the ionic nature of its bonds. The molecule has a bent or asymmetric structure, leading to an uneven distribution of charge. This asymmetry results in a dipole moment, confirming its polarity. Therefore, titanium oxychloride is considered a polar compound.


What does titanium dioxide do for spots acne?

what does titanium does? what does titanium does?


What is titanium also known as?

Titanium is also known as the symbol (Ti). This is titanium's element symbol. The scientific name for titanium is titanium dioxide.


What product is created from the element titanium?

Titanium is made in to lots of things like jewelry, titanium metal gifts, titanium material, & titanium parts. So, see there a lot of different stuff from titanium. :)


What is the for formula for titanium dioxide?

what is the formula for titanium dioxide.??


Is titanium an alloy?

No, Titanium is an element.


Is titanium is a semiconductor?

No, titanium is a metal.


What are some Characteristics of the moon?

The moon has many characteristics, but which are unique? well, there are quite a few!! - craters - no atmosphere - special layers and phases - canyons and mountains - aluminum and titanium crust - there are many moons in the solar system, not just one!!


What is compound name for TiO?

Titanium dioxide, also known as titanium(IV) oxideor titania, is the naturally occurring oxide of titanium, chemical formula TiO2.