0
What else can I help you with?
Can LPG be used as alternative to oxy-acetelene?
LPG is liquid petroleum gas and oxy-acetylene is oxy fuel welding. The LPG can be used as an alternative to oxy-acetylene and is cheaper and can be purchased in bulk. The oxy-acetylene is best used when making shorter, thinner, and faster cuttings.
What do you do if a oxy-acetylene gas is leaking from welding bottles?
It depends on where the gas is leaking. If it is from the regulator connection sometimes just readjusting and tightening the grooved nut will stop the leak. Turn off the valve and remove the regulator. Check for dirt particles and damage to the seat and regulator bulb (the fat part that fits against the seat), open and close the valve quickly to blow out any loose particles, reattach the regulator. Check to see if the gas is still escaping. If it is, the regulator bulb or the valve seat may be damaged. All cylinders have a fuseable plug and if it is leaking from there evacuate the area immediately and call emergency personnel. If it is from the valve area you may be able to stop the leak by tightening the packing nut at the base of the valve stem. With the regulator attached open the cylinder valve slightly and tighten the packing nut. Check to see if this stops the leak. If immediate attempts fail, evacuate the area.
What is a turbo tourch used for?
A turbo torch is is a welding tool used in the HVAC (Heating, Ventilation and Air Conditioning) field. The torch can use propane or oxy-acetylene gas to provide a high temperature flame.
How can one create acetylene safely and effectively?
To create acetylene safely and effectively, one can use a calcium carbide generator. This involves adding water to calcium carbide to produce acetylene gas. It is important to follow proper safety precautions, such as wearing protective gear and ensuring proper ventilation, to prevent accidents.
What is the procedure of oxy acetylene?
The oxy-acetylene welding process involves using a torch to mix oxygen and acetylene gases in a controlled manner to generate a high-temperature flame. The flame is then directed onto the metal workpiece to melt it, while a filler rod can be added if necessary to create a weld joint. Proper safety measures, such as wearing protective gear and ensuring proper ventilation, should be followed when using oxy-acetylene equipment.
Why does a banana brown faster in the refrigeration than on the counter?
because the refrigerator keeps it fresh and at one temperature. the counter changes temperature. Acetylene gas in the confinement of refrigerator hastens the browning process in banana.
What is the geometry at the carbons in the acetylene?
Acetylene has a linear molecule.
What acetylene oxidation state?
Acetylene is a neutral compound.
Is acetylene a proplene based fuel?
Acetylene, C2H2, is a pretty simple hydrocarbon. http://en.wikipedia.org/wiki/Acetylene
How chloroform converted to acetylene?
Chloroform cannot be directly converted to acetylene. Acetylene is typically produced from calcium carbide through a reaction known as the acetylene generation process. In this process, water is added to calcium carbide to produce acetylene gas.
When was Acetylene - album - created?
Acetylene - album - was created in 2005.
What polymers are derived from acetylene gas is called polychloroprene?
Acetylene
Another name for acetylene?
Acetylene (C2H2) is also known as ethyne. It is the simplest alkyne.
What is the percentage of carbon in acetylene?
probably 92.3% of carbon is present in acetylene..
