0
What else can I help you with?
What materials are used in boilers?
steel, copper and iron are the materials that are used in boilers.
What hazardous class is corrosive material?
Corrosive materials are either solid or liquids that when they come into contact with human skin will cause tissue damage. Corrosive materials are a HAZMAT class 8.
What is the equivalent to shell alvania g3 to caltex?
ouhg
What material are used to make jacket surround hot water tank?
The jacket surrounding a hot water tank is typically made from insulated materials such as fiberglass, foam, or polyurethane. These materials help reduce heat loss, improve energy efficiency, and maintain the water temperature. In addition to insulation, the outer layer may be constructed from metal, plastic, or composite materials for durability and protection.
What is Screening as part of chemical engineering unit operations?
screening is a process by which there is separation occurs in materials.
What is the ASME equivalent of SCM435?
AISI 4135 or 4137
What is chemical composition of scm435?
C≤Si≤Mn≤P≤S≤CrNi0.33-0.380.15-0.350.3-0.60.030.030.9-1.2≤0.25MoAlCuNbTiVCe0.15-0.3≤0.3NCoPbBOther
What is the equivalent of din 1543?
The ASTM equivalent of DIN 1543 is ASTM A572. Both of these materials are a type of carbon steel.
How to compute the cost per unit for direct materials and for conversion costs?
The unit cost for direct materials is computed by adding the materials cost in the beginning work in process inventory to the materials cost for the month divided by the total equivalent production figure.Conversion cost per unit is computed by adding direct labor and factory overhead divided by the total equivalent production figure.
What is the ASTM equivalent of DIN 1543?
The ASTM equivalent of DIN 1543 is ASTM A572. Both of these materials are a type of carbon steel.
What is the main purpose of conducting a hazardous materials exercise?
Whether planned procedures workThe purpose of conducting a hazardous materials exercise is to practice your response to a hazardous materials event without having to deal with "real" hazardous materials. This is the equivalent in hazardous materials of maneuvers or war games in the military, or of fire drills in school.
How many mega electron volts were in the Chernobyl disaster?
The Chernobyl disaster released radioactive materials equivalent to about 100 megaelectronvolts (MeV) of energy.
How do you increase sand equivalent?
To increase the sand equivalent (SE) of a soil or aggregate, you can reduce the amount of clay and fine silt particles, which negatively impact the SE value. This can be achieved by washing the material to remove finer particles, blending in coarser sand or aggregates that have higher SE values, or selecting raw materials with a better gradation. Additionally, ensuring proper grading and minimizing contamination from clay-rich materials will help enhance the sand equivalent.
What is Equivalent Material for German Din 20898?
DIN 20898 refers to a standard for various types of steel used in the production of fasteners and other components. Equivalent materials can vary based on the specific grade or type of steel specified in the standard. Common equivalents may include materials from other standards, such as ASTM or ISO, but it is essential to refer to a detailed conversion chart or consult material specifications to find the precise equivalent for a specific grade. Always ensure that the equivalent material meets the required mechanical and chemical properties for the intended application.
What is gauge thickness for 0.19 inches?
Gauge thickness is a measurement used to specify the thickness of materials, particularly in metalworking. For 0.19 inches, the equivalent gauge thickness can vary depending on the type of metal, but it is typically around 10 gauge for steel. However, it's important to consult a gauge chart specific to the material to confirm the exact equivalent, as different materials have different gauge standards.
What is bs equivalent to astm c579?
The British Standard (BS) equivalent to ASTM C579, which covers the testing of hydraulic cement-based materials for compressive strength and other properties, is BS 6319-3. This standard also addresses similar testing procedures for determining the properties of cement and concrete. Both standards aim to ensure consistency and reliability in testing cementitious materials.
How do you calculate equivalent Moment of inertia of a section made up of two different materials?
To calculate the equivalent moment of inertia of a section made up of two different materials, first determine the moment of inertia for each material about the same axis using the formula ( I = \int y^2 , dA ), where ( y ) is the distance from the axis to the differential area ( dA ). Then, combine the contributions from both materials by summing their individual moments of inertia. If the materials have different densities or cross-sectional areas, consider their effective areas and apply the parallel axis theorem if necessary. The overall moment of inertia is the sum of the individual moments of inertia.
