0
What else can I help you with?
What are the health and safety hazards of hydrocarbons?
Hydrocarbons are a vast and varied group of chemicals with a wide range of health and safety hazards. No single hazard applies to all hydrocarbons. It is best to seek information about the hazards of specific hydrocarbons by category or by specific chemical name.
What is calcined petroleum coke and there users?
Petroleum coke, also calledpetcoke, is a rocklike leftover of the oil refining process. Energy can be created from petroleum coke, so it is often turned into dry cells and fuels based on the type of coke it is. There are several classifications of petroleum coke, and each one is used to create different substances.Calcined petroleum coke is made when petroleum coke is calcined, or roasted, just below the melting point. This coke is commonly used in the smelting industry for the creation of metals such as titanium, aluminum and steel. This is because calcined coke is used as an anode to produce these metals.The largest single nonfuel use of petroleum coke is in the manufacture of carbon anodes for the aluminum smelting industry which accounts for almost 80 percent of all petroleum coke produced.
What is printed circuit heat exchangers?
Printed Circuit Heat Exchangers (PCHEs) are characterised as high integrity plate type heat exchangers. They are fabricated from flat metal plates (sheets) that have fluid flow channels chemically etched into them using the same process as printed circuit hence the product name. The etched plates are stacked and diffusion bonded together to make the core of the heat exchanger(s). PCHEs can be made of one or several cores welded together to suit the duties required. Headers and nozzles are attached to the core(s) to complete the exchanger. PCHE are highly compact, highly robust exchangers and can achieve high thermal effectiveness of over 98% depending on the process: - PCHE are four to six times smaller than conventional shell and tube heat exchangers of the equivalent duty. - They have a pressure capability in excess of 600 bar (9000 psi) and can cope with extreme temperatures, ranging from cryogenic to above 900°C (1650°F). They are well established in the upstream hydrocarbon processing, petrochemical and refining industries. They can incorporate more than two process streams into a single unit. This design feature has space and weight advantages, reducing exchanger size together with piping and valve requirements. Additional functions can be included in the exchanger design, such as chemical reaction, mass transfer and mixing, optimising the process considerably. The association of chemical etching and diffusion bonding processes into a single product allow the use of a wide range of materials of construction enabling the use of a wide range of clean fluids in the heat exchanger, including corrosive ones.
Fluidized media reactor?
It is a single tank unit, consisting of a bar screen chamber, specially designed floating media to facilitate the attached growth process, oxygen transfer through diffused membrane aeration, lamella settler and chlorine contact tank. The system is available in mild steel and reinforced concrete. These systems are using for "WASTE WATER TREATMENT". Mahipal Reddy M Ionexchange Services lmtd Ph- +91 9986953011
What is the difference between the operation of a automatic boiler and manual boiler?
boiler are working on same principal but automatic and manual boiler has difference that manual boiler working at single element loop and automatic boiler work at three element loop.single loop means when fuel increase mean load increase on boiler by adjusting fuel operator has to adjust steam drum level manualy , while automatic means when load increas, fuel increase steam drum level adjust automaticaly by watching fuel consumption.
Why repeated extraction is better than solvent extraction?
Repeated extraction allows for greater efficiency in extracting desired components from a given sample due to the cumulative effect of multiple extraction cycles. This method ensures that more of the target compounds are effectively removed, leading to higher overall extraction yields compared to a single solvent extraction. Additionally, repeated extraction can help to overcome limitations such as incomplete extraction or low solubility that may be encountered with a single extraction.
How efficient is the extraction of tea leaves containing 1.0 g of caffeine with two 30 mL portions of chloroform over that of a single-step reaction?
Using two 30 mL portions of chloroform for extraction of tea leaves containing 1.0 g of caffeine would be more efficient than a single-step reaction due to increased contact with the solvent. The repeated extraction increases the surface area for caffeine to transfer into the solvent, resulting in higher extraction efficiency. This method helps to maximize the extraction of caffeine from the tea leaves.
What is better multiple extraction or single extraction?
Multiple extraction.
Is solvent a mixture?
No, a solvent is a single substance that is used to dissolve other substances, such as solutes, to form a solution. It is not a mixture but rather a pure substance.
How is fat content determined by soxhlet method?
The Soxhlet method for determining crude fat content is a lengthy process requiring up to a day for a single analysis. The solvent extraction step alone takes six hours. The method is therefore not favoured for routine testing purposes in the meat industry, rather it is used as a standard reference method. As well as being used to determine the fat content of meat and meat products, the Soxhlet method can be used to determine the fat content of meat meal. In the case of meat meal, the Soxhlet method is often the method of choice as a routine test. Crude fat content is determined by extracting the fat from the sample using a solvent, then determining the weight of the fat recovered. The sample is contained in a porous thimble that allows the solvent to completely cover the sample. The thimble is contained in an extraction apparatus that enables the solvent to be recycled over and over again. This extends the contact time between the solvent and the sample and allows it time to dissolve all of the fat contained in the sample. In order for the solvent to thoroughly penetrate the sample it is necessary for the sample to be as finely comminuted as possible. Before the solvent extraction step can begin the sample must be dried. Often a moisture analysis is required as well as a fat analysis and this can be achieved by accurately weighting the sample after drying and before extraction, as well as before drying. If a moisture analysis is not required the sample need only be weighed before drying and again after solvent extraction. In either case the sample must be weighed accurately on an analytical balance at each stage of the analysis. When the sample is being weighed it is important not loose any part of it including any moisture that may weep from the sample during weighting. Loss of this moisture can be avoided by weighing the sample directly into a pre-dried extraction thimble or alternatively on to a pre-dried filter paper. If a moisture analysis is required, the dried extraction thimble or filter paper also has to be pre-weighed. After weighing, the sample (in the thimble or filter paper) can be placed in the oven for drying. After drying, the sample can be placed directly into the distillation apparatus for extraction.
Is Implanon a single implant and is effective for 3 years?
Yes, Implanon is a single rid implant that is effective for three years.
What is solute and solvent of water?
Water is a single compound so it cannot be a solute and solvent at the same time.If you have a drop of alcohol in a bucket of water then water is the solvent, but if you have a drop of water in a bucket of alcohol then water is the solute.
How does electricity react to resistances in parallel and in series?
Resistances in series act just as if they were one single resistor. The value of the single resistor is the sum of the individual resistors connected in series ... Ra + Rb + Rc etc. When several resistors are in series, the effective total is greater than the biggest one. Resistance in parallel act just as if they were one single resistor. The reciprocal of the value of the single resistor is the sum of the reciprocals of the individual resistors connected in parallel ... Total effective resistance = 1 divided by (1/Ra + 1/Rb + 1/Rc + etc.) When several resistors are in parallel, the effective total is less than the smallest one. Once you figure out the effective value of the series- or parallel-combination of many resistors, you handle them as if they were one single resistor, and you can work with the voltage and current: Current through any resistance = (Voltage across it) divided by (its resistance).
What is multiple access why is multiplexing needed in data communication?
Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.
My wife and i would like to have a baby, but what is the ballpark cost for egg & sperm extraction with IVF?
The IVF procedure typically includes egg and sperm extraction. A single cycle IVF typically costs around $10,000.
Why is single issue important to ensure an effective pressure group?
All the groups energy is in it to pass the single issue.
What word is the best antonym for several?
Single
