answersLogoWhite

0

What else can I help you with?

Continue Learning about Chemical Engineering

What is the purpose of wall seal blower in cfbc boiler?

The wall seal blower in a Circulating Fluidized Bed Combustion (CFBC) boiler serves to maintain a proper seal between the combustion chamber and the external environment. By creating a slight negative pressure, it prevents the escape of flue gases and ensures efficient combustion by maintaining the required airflow. Additionally, it helps to enhance the overall efficiency of the boiler by optimizing the circulation of the bed material and improving the combustion process.


Function of root blower in cfbc boiler?

the pressure of the root blower is higher then the wind box pressure, because what ever the unburnt particle come from cyclone separator is collect in return leg this unburnt particle return back into combustion chamber so the function of root blower is to continuous circulation.


What is Boiler feed pump?

Function - It adds the pressure to the feed water before it entyers into boiler feed pump suction Advantage - Ensures high margin NPSH A for boiler feed pump spinning at high rpm (5250Rpm) Drive for booster - Normally @1450 rpm Type of impeller- Mostly preferred Double suction


What is boiler corrosion?

the decay of boiler material by chemical or electrochemical attack by its environment is known as boiler corrosion


Why you use boiler in oil refinery?

Use of water in a refinery is makeup for boiler feed. The chief uses of steam are for stripping, steam distillation, and vacuum distillation. The steam comes in contact with the products in these operations, and generally the steam condensate is so highly contaminated that it cannot be reused for boiler feed or for other purposes. Steam is also used for process heating, for pumping, and, in some refineries, for generating electric power

Related Questions

How soot blower works?

A soot blower is a device used to remove soot buildup in boilers or furnaces. It operates by releasing steam or compressed air through nozzles to dislodge the soot from the heating surfaces, helping to improve heat transfer efficiency and prevent potential boiler damage. Soot blowers are typically automated to clean the surfaces at regular intervals without the need for manual intervention.


What is Ik pass in a boiler?

An IK on a boiler is a Soot Blow. It is mounted on the sidewall of a boiler furnace and cleans the internal boiler parts with high pressure.


Why not soot blowing performed of air preheater?

Soot blowing is done in air pre heater by a blower called swing blower which is different from half retractrable or full retractable or deslagger.


How do you clean an oil fired boiler?

Cleaning a boiler is a dirty job and should only be done by a licensed pluming or heating professional but let's talk about how a oil fired boiler would get cleaned by that oil burner service man. There are several things that are done when fully cleaning and serving an oil burner, although most people think its just a matter of vacuuming out the soot when there is actually a lot more to it then that. This is exactly why only a certified or licensed professional should be doing the work. Let's now talk about what will be done and how to clean a boiler. The materials that will be need to fully clean and maintain the boiler will be a new oil pump filter, oil line filter, new burner nozzle and possibly new electrodes depending on their condition. The boiler will also have be vacuumed out and that will have to be done with a special vacuum that is made for soot. These vacuums have special filters inside so that the soot does not return to the air when removing the fine soot ash from inside of the oil burner.


How many watts does a hot water service use?

That would depend on the boiler - look on the boiler plate it will tell you the answer for that boiler there.


Where can one find boiler servicing?

There are a number of references to use to find boiler servicing. For example, Service Experts, Inferno Boiler, and Boiler all provide useful information about boiler servicing.


What is AQC boiler?

It is a type of boiler that you can use in your business. There are many different types that you can choose from.


If you don't have a double boiler what can you use?

that depends use for what


What tools do a Boiler Engineer use?

They use your face


Where you will use Cochran boiler?

lpc


What is the purpose of wall seal blower in cfbc boiler?

The wall seal blower in a Circulating Fluidized Bed Combustion (CFBC) boiler serves to maintain a proper seal between the combustion chamber and the external environment. By creating a slight negative pressure, it prevents the escape of flue gases and ensures efficient combustion by maintaining the required airflow. Additionally, it helps to enhance the overall efficiency of the boiler by optimizing the circulation of the bed material and improving the combustion process.


How does boiler capacity is determine?

In boiler which is a closed vessel fluids are heated & stored for use in different processes