0
What else can I help you with?
When you put a thermometer into a pot of melting ice when will the temperature rise past zero?
when all the ice has melted
What temperature is copper melted at?
Copper melts at a temperature of approximately 1,984 degrees Fahrenheit (1,085 degrees Celsius).
Can tungsten be melted, and if so, at what temperature does it melt?
Yes, tungsten can be melted. It has a very high melting point of 3,422 degrees Celsius (6,192 degrees Fahrenheit).
If you put a thermometer into a pot of melting ice when will the temperature rise past zero?
The temperature will rise past zero once all the ice has melted and the water starts to warm up. The temperature will then continue to increase until it reaches the boiling point of water.
Melting temperature for microscope slide glass?
The melting temperature for microscope slide glass is typically around 1400-1600 degrees Celsius. This high temperature is necessary to ensure the glass is properly melted and formed into the flat, smooth surface required for microscopy.
When you put a thermometer into a pot of melting ice when will the temperature rise past zero?
when all the ice has melted
What temperature is copper melted at?
Copper melts at a temperature of approximately 1,984 degrees Fahrenheit (1,085 degrees Celsius).
What temperature is a thermometer supposed to be at in iced water?
A thermometer placed in iced water can be expected to indicate a temperature of around 0oC, as this is the temperature at which water freezes. The temperature indicated may be higher if there is a lot of water relative to ice in the container (for example, if a lot of ice has melted).
Can tungsten be melted, and if so, at what temperature does it melt?
Yes, tungsten can be melted. It has a very high melting point of 3,422 degrees Celsius (6,192 degrees Fahrenheit).
What temperature will the sensor show when ice is melting?
When ice is melting, the temperature sensor will show 0 degrees Celsius until all the ice has melted. This is because the melting point of ice is 0 degrees Celsius.
What is the temperature of ice water in Celsius?
At standard pressure, pure water and ice are in equilibrium at zero Celsius.
If a solid piece of naphthalene is heated and remains at 80 degrees Celsius until it is completely melted you know that 80 degrees Celsius is?
80 degrees Celsius is the melting point of naphthalene. At this temperature, the solid naphthalene transitions to a liquid state, and the temperature remains constant during the phase change until all of the solid has melted. This characteristic indicates that the energy being added to the system is used for breaking intermolecular forces rather than increasing temperature.
How Will You Calibrate a thermometer in degree Celsius.. ..?
The thermometer was used by the originators of the Fahrenheit and Celsius scales.Anders Celsius, a Swedish Astronomer, devised the Celsius scale, which was described in his publication the origin of the Celsius temperature scale in 1742.Celsius used two fixed points in his scale: the temperature of melting ice and the temperature of boiling water. This wasn't a new idea, sinceIsaac Newton was already working on something similar. The distinction of Celsius was to use the melting temperature and not the freezing temperature. The experiments for reaching a good calibration of his thermometer lasted for 2 winters. By performing the same experiment over and over again, he discovered that ice always melted at the same calibration mark on the thermometer. He found a similar fixed point in the calibration of boiling water vapour (when this is done to high precision, a variation will be seen with atmospheric pressure). At the moment that he removed the thermometer from the vapour, the mercury level climbed slightly. This was related to the rapid cooling (and contraction) of the glass.The air pressure influences the boiling point of water. Celsius claimed that the level of the mercury in boiling water is proportional to the height of the barometer.When Celsius decided to use his own temperature scale, he originally defined his scale "upside-down", i.e. he chose to set the boiling point of pure water at 0 °C (212 °F) and the freezing point at 100 °C (32 °F).[1] One year later Frenchman Jean Pierre Cristin proposed to invert the scale with the freezing point at 0 °C (32 °F) and the boiling point at 100 °C (212 °F). He named it Centigrade.[2]Finally, Celsius proposed a method of calibrating a thermometer:Place the cylinder of the thermometer in melting pure water and mark the point where the fluid in the thermometer stabilises. This point is the freeze/thaw point of water.In the same manner mark the point where the fluid stabilises when the thermometer is placed in boiling water vapour.Divide the length between the two marks into 100 equal pieces.These points are adequate for approximate calibration but both vary with atmospheric pressure. Nowadays, the triple point of water is used instead (the triple point occurs at 273.16 kelvins (K), 0.01 °C).
If you put a thermometer into a pot of melting ice when will the temperature rise past zero?
The temperature will rise past zero once all the ice has melted and the water starts to warm up. The temperature will then continue to increase until it reaches the boiling point of water.
How do you know if ice cubes reach room temperature?
You can tell if ice cubes have reached room temperature by observing if they have completely melted. Once they have melted, the water will reach room temperature. Placing a thermometer in the water can also confirm if it has reached room temperature.
Melting temperature for microscope slide glass?
The melting temperature for microscope slide glass is typically around 1400-1600 degrees Celsius. This high temperature is necessary to ensure the glass is properly melted and formed into the flat, smooth surface required for microscopy.
What can melt tungsten, and at what temperature does it occur?
Tungsten can be melted by using a high-temperature electric arc furnace, which can reach temperatures above 6,192 degrees Fahrenheit (3,422 degrees Celsius).
