0
What else can I help you with?
What does a graduated cylinder charging device do?
A graduated cylinder charging device is used to charge or fill graduated cylinders with liquids to a specific volume or measurement. It helps ensure accuracy and precision when transferring liquids for various laboratory experiments or measurements.
Can a graduated cylinder be heated up?
It is not recommended to heat a graduated cylinder directly, as they are typically made of glass and can crack or shatter when exposed to high temperatures. It is best to use a proper heating device like a water bath or hot plate when heating liquids in a graduated cylinder.
What safety device is used on an acetylene cylinder to reduce its danger in the event of exposure to extreme heat?
A fusible plug is used on an acetylene cylinder to release the gas in a controlled manner if exposed to extreme heat, preventing the cylinder from exploding. This plug is designed to melt at a specific temperature, allowing the gas to escape safely.
What is a hot water cylinder tray?
A tray place under the cylinder designed to catch any water that may leak and also available with an overflow to take the water away to a drain or outside, preventing structural damage caused by water leaks.
Which Piece of laboratory equipment is used to determine the volume of a liquid?
If you are doing a lab experiment or you use the metric system, a gradulated cylinder would be an ideal choice. if you are cooking or just doing something irrelevant to what you are supposed to be doing, i would use an average kitchen measuring cup (teaspoon, table spoon, one cup, etc...)
How do you open a 38 special cylinder?
on the left side of revolver, behind the cylinder, there is a thumb device. for a colt the thumb device slides back to open the cylinder and on a S&W the thumb device is pushed forward to open the cylinder..............................
What is a graduated cylinder and a balance?
A graduated cylinder is a glass or plastic device used in laboratory to measure volume of liquids.
What are the steps to take to hone a cylinder?
There are many steps that one has to take to hone a cylinder. One must first get a machine to spin the cylinder and then one must bore into the cylinder with a cutting device.
How does a rupture disk differ from a fusible plug?
A rupture disk (disc) is a pressure relief device that reliefs pressure when the pressure inside the protected equipment exceeds the set pressure. A fusible plug reliefs pressure when the plug is weakened due to high temperature.
Is an OPD over fill protection device on a propane cylinder temperature sensitive?
No
Which component will relieve cylinder pressure at 7200 PSIG?
To relieve cylinder pressure at 7200 PSIG, a pressure relief valve (PRV) or a pressure relief device specifically rated for that pressure level is commonly used. This component automatically opens to vent excess pressure, ensuring safety by preventing cylinder rupture. It's crucial to select a relief valve that meets the required specifications for the specific gas and application involved. Regular maintenance and testing of the relief valve are also essential to ensure its reliability and effectiveness.
How do engines on cars work?
Fuel goes in the car's cylinder, and when the fuel goes in the cylinder it causes a device to to lower. Then the fuel explodes, and when this device comes up, it pushes the CO2 and SO2 out of the car. The system then restarts again and again.
What measuring device should you use to measure 95mL?
A graduated cylinder would work.
How many bytes in one cylinder?
For 3390 Device: 1 Track = 56664 bytes 15 Tracks = 1 Cylinder 1 Cylinder = 15 * 56664 = 849960 bytes (.85 MB)
What does a graduated cylinder charging device do?
A graduated cylinder charging device is used to charge or fill graduated cylinders with liquids to a specific volume or measurement. It helps ensure accuracy and precision when transferring liquids for various laboratory experiments or measurements.
What is a bursting radius and how is it different from a lethal radius?
The bursting radius is the distance from a device that may cause wounds. The lethal radius is the distance that will cause death to 50% of persons exposed. A White Phosphorus hand grenade has a bursting radius of about 35 meters- it will not kill 50% of all persons within 35 meters. The 40mm HE grenade launcher projectile has a 5 meter lethal radius- it will kill 50% of the people that are within 5 meters when it detonates.
Can use rupture disk at the place of pressure safety valve at WikiAnswers?
Rupture disk are perfectly available as replacement of sfaety relief valves if you will consider that they are non-reclosing. In the case of an activation the pressure relief opening will remain open afterwards, where in the cas eof safety relief valve the device is reclosing.
