0
What else can I help you with?
How do you raise pH level in pool?
You can use soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda. You can also use borax, sold as 20 Mule Team Borax. Sodium bicarbonate, sold as baking soda, Alkalinity Increaser or Alk Up, will raise pool pH levels, but not very efficiently.
Can you use borax to raise alkalinity?
Yes, borax can be used to raise pH levels in a pool, but it is not recommended for raising alkalinity as it can affect the pH levels without significantly impacting the alkalinity. It is better to use baking soda or soda ash to raise alkalinity in a pool.
Can you mix bleach and borax?
According to the Dial Corporation, manufacturers of 20 Mule Team Borax, "Borax and chlorine bleach can be safely used together in washing machines. Always read all safety information on each package."
How do you raise pH levels in swimming pools?
To raise pH levels in a swimming pool, you can add sodium carbonate (soda ash) or sodium bicarbonate (baking soda) to the water. Test the pH levels regularly and follow the manufacturer's instructions on the product packaging for proper dosage. It's important to monitor the pH levels to ensure they are within the recommended range for swimming pool water.
How do you separate borax from water?
To separate borax from water, you can use evaporation. Simply heat the solution of borax and water until all the water evaporates, leaving behind the borax. You can then collect the solid borax that remains.
Will 20 mule team borax kill mouse?
20 Mule Team Borax does not indicate on the package for use of getting rid of mosquitoes, although some people have had positive results using the product for getting rid of them.
How do you raise pH level in pool?
You can use soda ash (sodium carbonate), sold as pH Increaser, pH UP or Arm & Hammer Washing soda. You can also use borax, sold as 20 Mule Team Borax. Sodium bicarbonate, sold as baking soda, Alkalinity Increaser or Alk Up, will raise pool pH levels, but not very efficiently.
Can you use borax to raise alkalinity?
Yes, borax can be used to raise pH levels in a pool, but it is not recommended for raising alkalinity as it can affect the pH levels without significantly impacting the alkalinity. It is better to use baking soda or soda ash to raise alkalinity in a pool.
How much borax do you use in your green pool?
Only use 20 Mule Team Borax without detergent. This raises your PH without raisig alkalinity. Try using the same amount you would with PH plus, and wait 2 to 4 hrs. and check your PH reading. If your alkalinity is low you can use baking soda to raise your alkalinity. Baking Soda raises PH and Alkalinity. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax. http://www.poolsolutions.com/gd/borax_20mule.html TS
Can you use borax to raise pH in swimming pools?
The most commonly sold product for that purpose is sodium carbonate, aka soda ash, sold as Ph Up by pool stores and as "Washing Soda" by grocery stores.You can also use 20 Mule Team Borax Laundry Booster (sodium tetraborate). It can be found at many grocery stores. Try using the same amount as you would with PH plus 1 lb. to 10,000 gallons, and wait 2 to 4 hrs. Then check your PH reading. If it's still low, add some more until you get it to 7.2 to 7.8 range.Caution - check your alkalinity before using borax, because borax raises PH only, without affecting your alkalinity much. If your alkalinity is also low you can use baking soda (sodium bicarbonate) to raise your alkalinity and PH. Baking Soda raises PH and Alkalinity at the same time. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax: www.poolsolutions.com/gd/borax_20mule.html
How many people use horse drawn carriages now?
A 20-mule team, which was actually 18 mules and 2 horses in the lead, could pull 10 tons of coal or borax ore.
Can you mix bleach and borax?
According to the Dial Corporation, manufacturers of 20 Mule Team Borax, "Borax and chlorine bleach can be safely used together in washing machines. Always read all safety information on each package."
How to lower the pH without lowering alkalinity?
baking soda is the chemical that is used to raise your pH and alk. when both of these are in range they "buffer each other" which means it usually will stay constant. I also use baking soda...Sam's Club sells it in 12lb bags...it usually has a 'key' on the back of the bag of how much to use for what size pool. It also helps your skin stay soft from the swim! Baking Soda is great if you need to raise BOTH the pH and the alkalinity at the same time. If your alkalinity is at the correct level, and your pH is low, you do not want to raise the alkalinity, so do not use Baking Soda.... Instead, use "20 Mule Team BORAX" - half a box at a time, wait a couple of hours and re-test each time. Make sure you buy the "20 Mule Team BORAX" and not any kind of Detergent with Borax in it. That will give you a mess. The "20 Mule Team BORAX" can be found in the Laundry Additives section in your local super market for a fraction of the cost of the pH-up products, and will work wonderfully without raising your alkalinity to harden your water too much. It also leaves your skin soft after a swim, like the Baking Soda. Here's a link to show the use of 20 Mule Team Borax in your pool to raise the PH without affecting the Alkalinity levels: http://www.poolsolutions.com/gd/borax_20mule.HTML And another link to show more replacement chemicals, and how much to use: http://www.poolsolutions.com/gd/grocery.HTML
How do you raise pH levels in swimming pools?
To raise pH levels in a swimming pool, you can add sodium carbonate (soda ash) or sodium bicarbonate (baking soda) to the water. Test the pH levels regularly and follow the manufacturer's instructions on the product packaging for proper dosage. It's important to monitor the pH levels to ensure they are within the recommended range for swimming pool water.
To raise the pH in a pool you use sodium carbonate I was told that you could also raise the pH in a pool by using sodium bicarbonate Is this true?
Answer The most commonly sold product for that purpose is sodium carbonate, aka soda ash, sold as Ph Up by pool stores and as "Washing Soda" by grocery stores. You can also use 20 Mule Team Borax Laundry Booster. It can be found at many grocery stores. Try using the same amount as you would with PH plus 1 lb. to 10,000 gallons, and wait 2 to 4 hrs. Then check your PH reading. If it's still low, add some more until you get it to 7.2 to 7.8 range. Caution - check your alkalinity before using borax, because borax raises PH only, without affecting your alkalinity. If your alkalinity is also low you can use baking soda to raise your alkalinity and PH. Baking Soda raises PH and Alkalinity at the same time. Baking Soda has the same ingredients as Alkalinity plus, but half the price. Take a look at this web site for more information on Borax: www.poolsolutions.com/gd/borax_20mule.html
What is in BioGuard Optimizer Plus?
100% sodium tetraborate which is exactly what is in 20 Mule Team Borax in the laundry detergent section of walmart, kmart and your grocery store for about $0.63 per pound! yeahThat is true. But keep in mind that Borax is not labled for use in a swimming pool. I know it is a technicality, but if someone gets sick and they sue ... well, better to stick to the labeled directions.ANSWERTechnically, the current label lists it as 99.5% Sodium Biborate Pentahydrate. The chemicals are similar to be sure, however they are not entirely interchangeable. Best to stick with the labeled use.
How do you separate borax from water?
To separate borax from water, you can use evaporation. Simply heat the solution of borax and water until all the water evaporates, leaving behind the borax. You can then collect the solid borax that remains.
