answersLogoWhite

0

yes because it posses the properties of ferro magnetic materials

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Chemistry

What is metal rod?

A metal rod is a solid cylindrical metal object that is typically used for structural support, reinforcement, or conducting electricity. It is usually made from materials like steel, aluminum, or copper and comes in various sizes and shapes depending on its intended use.


Can you use muriatic acid to clean copper 43k?

It is not recommended to use muriatic acid to clean copper, as it can cause damage to the copper surface and potentially lead to discoloration. It is safer to use a specific copper cleaner or a mixture of vinegar and salt to clean copper surfaces effectively.


What other else substances that can use instead of copper oxide in preparing copper sulphate?

Copper carbonate or copper hydroxide can be used as alternatives to copper oxide in preparing copper sulfate. These compounds can react with sulfuric acid to produce copper sulfate in a similar manner to copper oxide.


Can you use an iron spatula to stir a solution of copper sulphate?

It is not recommended to use an iron spatula to stir a solution of copper sulfate as the iron can react with the copper sulfate solution and potentially contaminate or alter the solution. It is best to use a glass or plastic spatula for stirring solutions containing copper sulfate.


How does acid generate electricity?

Acid itself cannot generate electricity. The electricity is generated by the flow of the electrons. So we can use active metal & inactive medal with acid to generate electricity. For example. If you put a copper rod and a zinc rod in acid solution (for example, HCl), connect the two rods with a conductive wire (metal wire). The the electricity will be generated because the electrons will move from the Zinc (active) rod to the copper (inactive) rod

Related Questions

Why is copper wire better to use for an electromagnetic generator?

Copper wire is better for an electromagnetic generator because copper has high electrical conductivity, which allows for efficient transmission of electricity. It also has good ductility, making it easy to shape and form into coils for the generator. Additionally, copper has good resistance to corrosion, ensuring long-term durability of the generator.


Why must you preheat copper before brazing?

You usually do not braze copper, you solder it. If you were to use brazing rod on copper, the copper would have very close to the same melting point as the brazing rod. This makes it difficult to do. As far as preheating the copper, it needs to be hot enough for the brazing to flow.


How do you calculate the thickness of titanium in the copper core titanium rod?

To calculate the thickness of titanium in a copper core titanium rod, you can use the formula for the volume of the rod and the respective densities of copper and titanium. First, determine the total volume of the rod using its length and outer diameter. Then, subtract the volume occupied by the copper core, which is based on the inner diameter. Finally, use the density values of titanium and copper to find the thickness of the titanium layer by rearranging the volume equations to solve for the outer radius.


Where does the excess charge on a copper rod flow to if you don't use an insulator?

If you connect the rod with a conductor, part of the charge will flow to the conductor.


How many gauge is required of copper wire in multiple generator science project?

34 gauge copper wire will work but to use the 35 gauge copper wire is the best choice


How can I ensure the safety and effectiveness of grounding a portable generator?

To ensure the safety and effectiveness of grounding a portable generator, follow these steps: Use a grounding rod to connect the generator to the earth. Make sure the grounding rod is placed in a location with good soil conductivity. Check the generator's manual for specific grounding instructions. Regularly inspect the grounding connection to ensure it is secure. Avoid using the generator in wet or damp conditions to reduce the risk of electrical shock.


Can you use a copper algicide with a chlorine generator or will it destroy the chlorine generating plates?

Using a copper algicide with a chlorine generator is generally not recommended because the copper can potentially damage the chlorine generating plates. It's best to consult with the manufacturer of your specific equipment to determine compatibility and any potential risks.


What is Conventional Earthing?

The conventional earth is the use of a copper rod and plate driven into the earth.In dry areas this may be not sufficient to make a good earth and chemical systems are available. Chemical earths use a more resistant material to copper in the form of a tube packed with chemicals.These earths are more for the use of lightning conduction rather than electrical safety earth.Very popular in India.


Which brazing rod do you use when brazing copper to brass?

You should use solder, not brazing. Brazing is used to join iron or steel products together.


Toget a feebas do you have to use a old rod a rod or a super rod?

use the super rod


How long would it take for sound impulse to travel through a copper rod 25 kilometer long?

The speed of sound in copper is about 3560 meters per second. To find the time it takes for a sound impulse to travel 25 kilometers through a copper rod, you can use the formula time = distance/speed. Plugging in the values, you get time = 25000 meters / 3560 m/s ≈ 7 seconds.


How do I properly install a grounding rod for electrical safety?

To properly install a grounding rod for electrical safety, follow these steps: Choose a location outside your home where the rod can be driven into the ground. Use a grounding rod made of copper or copper-coated steel. Drive the rod into the ground vertically until only a few inches are above the surface. Connect a grounding wire from the rod to the main electrical panel using a grounding clamp. Ensure the wire is securely attached and that the connection is tight. Test the grounding system to ensure it is working properly and providing safety for your electrical system.