0
What else can I help you with?
What is the chemical equation for sulfuric acid and water?
The chemical equation for the reaction between sulfuric acid (H2SO4) and water (H2O) is: H2SO4 + H2O -> H3O+ + HSO4-
How do you prepared 0.02 n from 0.1 n h2so4?
To prepare 0.02N H2SO4 from 0.1N H2SO4, you can dilute the 0.1N H2SO4 by adding a calculated amount of water. To calculate the dilution factor, you can use the formula: C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration (0.02N), and you can solve for V2 to find the volume of the 0.1N H2SO4 to be diluted with water to get 0.02N H2SO4.
How do you dilute a 10 M H2SO4 to 1M H2SO4?
Remember M1V1=M2V2, where M is molarity and V is volume. M1/M2=V2/V1, 10/1=v2/v1, For diluting the acid, we can add acid to water. So, assuming that 10M H2SO4 is having 1ml of water, we should add 1M of H2So4 to 10ml of water.
Do they add smell to gasoline for safety reasons?
Yes, a smell is added to gasoline for safety reasons to help detect leaks and prevent accidents.
What happens to the final concentration of H2SO4 if there is water present in the volumetric flask when transferring from the pipette?
If water is present in the volumetric flask when transferring the H2SO4 solution from the pipette, the final concentration of H2SO4 will be diluted. This is because the water will mix with the H2SO4 solution, increasing the total volume in the flask without adding more H2SO4 molecules. As a result, the concentration of H2SO4 will be lower than intended.
What is the chemical equation for sulfuric acid and water?
The chemical equation for the reaction between sulfuric acid (H2SO4) and water (H2O) is: H2SO4 + H2O -> H3O+ + HSO4-
What are the components of battery acid?
H2SO4 and water
What can be preformed to detect a leak after fueling a gasoline powered boat?
Sniff test
What test can be performed to detect a leak after a gasoline-powered boat?
Sniff test
How do you prepared 0.02 n from 0.1 n h2so4?
To prepare 0.02N H2SO4 from 0.1N H2SO4, you can dilute the 0.1N H2SO4 by adding a calculated amount of water. To calculate the dilution factor, you can use the formula: C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration (0.02N), and you can solve for V2 to find the volume of the 0.1N H2SO4 to be diluted with water to get 0.02N H2SO4.
How do you dilute a 10 M H2SO4 to 1M H2SO4?
Remember M1V1=M2V2, where M is molarity and V is volume. M1/M2=V2/V1, 10/1=v2/v1, For diluting the acid, we can add acid to water. So, assuming that 10M H2SO4 is having 1ml of water, we should add 1M of H2So4 to 10ml of water.
Do they add smell to gasoline for safety reasons?
Yes, a smell is added to gasoline for safety reasons to help detect leaks and prevent accidents.
What is the prouct of cuso4.5h20 plus h2so4?
cuso4 +5h20 as h2so4 is acting as a dehydrating agent drawing the water out of the cuso4
Does gasoline dissolve in in water?
No. Gasoline is an oil product and does not mix with water.
What happens to the final concentration of H2SO4 if there is water present in the volumetric flask when transferring from the pipette?
If water is present in the volumetric flask when transferring the H2SO4 solution from the pipette, the final concentration of H2SO4 will be diluted. This is because the water will mix with the H2SO4 solution, increasing the total volume in the flask without adding more H2SO4 molecules. As a result, the concentration of H2SO4 will be lower than intended.
Is H2SO4 an electrolyte or non electrolyte?
No, H2SO4 is an electrolyte, as it produces hydronium ions in aqueous solution.
Which test can be performed to detect a leak after fueling a gasoline-powered boat?
SNIFF test
