0
No.
What else can I help you with?
When we compress a stone with your hand you can't compress it why?
BECAUSE in case of stone the molecules are closly packed and they have no vacant space between them and they have not the ability to close to each other so when we compress a stone we cant compress it
Why can't you compress a solid?
Solids consist of atoms and molecules closely packed together in a fixed arrangement. When external pressure is applied, the atoms/molecules can only vibrate or shift slightly, rather than compress further. This rigid structure makes it difficult to compress solids significantly without causing them to break or change their shape.
Why are liquids difficult to compress?
Liquids are difficult to compress because of their molecules. Since their molecules are already tightly packed together, they cannot be compressed much more. Doing so can only slightly alter their volume.
Are most solids dense and difficult to compress?
Yes, most solids are dense and difficult to compress because their particles are closely packed together and have a strong attraction to each other, making it hard to change their volume by compression.
Why can't you use gas in a brake pipe?
Gas is compressible, which means it can compress under pressure and cause the brake pedal to feel spongy and reduce the braking efficiency. Liquids like brake fluid are used in brake systems because they are incompressible, ensuring a consistent and reliable transfer of force from the brake pedal to the brakes.
Does brake fluid compress?
No.
Is blood a compressible fluid?
if the density of the fluid changes with respect to pressure is called compressible fluid f the density of the fluid does not changes with respect to pressure is called incompressible fluid
Why won't the brake cylinder compress properly?
The brake cylinder may not compress properly due to air bubbles in the brake fluid, a leak in the brake system, or a malfunctioning brake cylinder.
What makes hydraulic machines so strong?
Hydraulic machines rely on the low compressibility of a specific fluid. When the fluid is pumped into the cylinder that does the work and then sealed, the fluid's inability to compress ensures that the cylinder does not lower from the position is was moved to.
What causes a car to be hard to steer in the morning and squeal?
Hopefully, all you need is to add some power steering fluid. The cooler temperature at night can make the fluid you have compress and accentuate its lack, and a squeal occurs when more fluid is needed.
The pressure a fluid in a closed container exerts can be increased by thrust?
In a closed container, the pressure of a fluid can be increased by applying a force or thrust to compress the fluid. This results in an increase in the kinetic energy of the fluid molecules, leading to a higher pressure within the container.
Why will a cars braking system not work well if air gets into the brake fluid?
Air will compress under pressure, hydraulic brake fluid doesn't. Air in the system will give you a spongy peddle because of that.
What do massage techniques that alternately compress and decompress a joint capsule repeatedly have on the tissues?
They increase the fluid exchange inside the joint capsule, helping synovial fluid lubricate the surfaces so they have less friction.
Fork oil capacity for a yz?
with spring out, fully compress and fill fluid to elevan millimeters from top off inner fork tube.
How do you compress the rear brake caliper piston for 1995 Ford Thunderbird?
You can use a C-clamp to compress the caliper on just about any vehicle. You might want to place some rags near the Brake Master cylinder because brake fluid will travel back into it from what is left over in the brake lines. If you don't, you will spill brake fluid onto the floor.
Why can you not compress 2 liters of water into 1 liter?
water is a non compressible fluid. The molecules will resist compression much more than those of a gas. You can compress it, but only with an insane amount of force, much more than any human or machine couldaccomplish.
How do you get calipers to compress on Ford Expedition?
Well it kind of depends on what the piston looks like. Does it have two holes on the head of the piston? If so, you will either need the special tool to compress it or you can try to use a set of needle nose pliers to push and turn it at the same time. If it doesn't have the two holes then all you should have to do is take the old brake pad and put on the piston (shim side to piston) get a C clamp and compress it (the brake pad will help protect the piston as well as help to provide even pressure across the piston as you compress). It may take some pressure but eventually you should see it start to compress. I have done several brake jobs myself and this way works the best. Hope this helps and goodluck. note* - I have read that when compressing the piston you should have the bleeder screw open to allow some of the fluid to escape as you compress the piston. Also you could have the brake fluid reservoir cover open to allow for the fluid to escape that way. I have done both and they have worked fine for me.
