answersLogoWhite

0

To properly use a graduated pipette for accurate measurement in the laboratory, first ensure the pipette is clean and dry. Then, draw the liquid into the pipette slowly and steadily to the desired volume, making sure the meniscus aligns with the calibration mark. Hold the pipette vertically to allow any excess liquid to drain back into the container. Finally, touch the tip of the pipette to the side of the receiving vessel to release the remaining liquid.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Continue Learning about Chemistry

What are the two precautions taken to ensure accurate results?

Two precautions taken to ensure accurate results are properly calibrating equipment before use to ensure accuracy and consistency, and following strict measurement protocols to minimize errors and variability in data collection.


How to properly read a serological pipette for accurate measurements?

To properly read a serological pipette for accurate measurements, follow these steps: Hold the pipette vertically and at eye level. Check the calibration marks on the pipette to ensure it is the correct volume. Align the meniscus (the curved surface of the liquid) with the desired calibration mark. Read the volume at the bottom of the meniscus for an accurate measurement. Make sure to account for any liquid clinging to the walls of the pipette. By following these steps, you can ensure precise and accurate measurements when using a serological pipette.


What are the effects of lipemic sample on serum electrolyte?

A lipemic sample can interfere with the measurement of serum electrolytes by causing a falsely elevated potassium level due to the turbidity of the sample. Lipemia can also interfere with the accurate measurement of sodium, chloride, and bicarbonate levels in the serum. It is important to properly clear the sample of lipids before analyzing electrolytes to ensure accurate results.


How do you properly use a pasteur pipette for accurate and precise liquid transfer in the laboratory?

To properly use a pasteur pipette for accurate and precise liquid transfer in the laboratory, first, ensure the pipette is clean and dry. Next, draw the liquid into the pipette by gently squeezing the bulb and placing the tip into the liquid. Release the bulb slowly to draw in the desired amount of liquid. To dispense the liquid, hold the pipette at a slight angle and gently press the bulb to release the liquid drop by drop. Be careful not to introduce air bubbles, and always handle the pipette with care to avoid spills or contamination.


Where should all laboratory materials be returned?

All laboratory materials should be returned to their designated storage locations or areas as specified by lab protocols. It is important to ensure that each item is stored properly to maintain safety and organization within the laboratory.

Related Questions

Would it be more accurate to measure the amount of water that a container can hold by using one measurement with a large graduated cylinder or two measurements with a smaller graduated cylinder?

If you measure properly, the amount of water does not change. Measurement with whatever graduated cylinder you choose will not alter the amount of liquid measured. Most people choose to measure once with a larger one, but if the amount of liquid falls between the measurement lines, you can measure the "leftover" with a smaller cylinder and find the exact answer.


How do you use a meniscus properly?

To properly read the volume of a liquid in a graduated cylinder, look at the bottom of the meniscus at eye level. Make sure the surface of the liquid forms a curve due to surface tension. Read the volume at the bottom of the curve for an accurate measurement.


How to properly weight a cat?

To properly weigh a cat, place it on a scale designed for pets and record the measurement. Make sure the cat is calm and still during the process to get an accurate weight.


What is a graduated cylinder used for in science?

A graduated cylinder is a piece of laboratory glassware used to accurately measure out volumes of chemicals for use in reactions. They are generally more accurate and precise for this purpose than beakers or erlenmeyer flasks, although not as precise as a volumetric flask or volumetric pipet. They come in a variety of sizes for different volumes, typically 10 mL, 25 mL, 50 mL, or 100 mL and up to as large as 1 or 2 liters.Determine the volume contained in a graduated cylinder by reading the bottom of the meniscus at eye level.In other words, holding the graduated cylinder at eye level, the bottom of the curved surface of the liquid (called the meniscus) is where you read off the mark on the graduated cylinder to determine the volume properly.


How do you properly calibrate a pipette for accurate measurements in the laboratory?

To properly calibrate a pipette for accurate measurements in the laboratory, follow these steps: Check the pipette for any visible damage or contamination. Use a calibrated balance to weigh the water dispensed by the pipette. Compare the measured weight to the expected weight based on the pipette's specifications. Adjust the pipette if there is a discrepancy by following the manufacturer's instructions for calibration. Repeat the calibration process until the pipette consistently delivers accurate measurements.


What is the conclusion to measurement?

It is very important to measure accurately and precisely. Because once our data's aren't measured properly, our measurements would not be accurate as they need to be


Does a graduated cylinders use millimeters?

A graduated cylinder is more accurate to measure by millilitres, definitely. Unless you are told where gradiations should start. The millilitre graduations (and often 0.1ml graduations) are calibrated properly. Whereas, if you were to put in millimetre calibrations you would end up with very imprecise volumes.


How do you properly empty graduated cylinders?

As for pipettes, leaving the liquid to drain slowly.


What are the two precautions taken to ensure accurate results?

Two precautions taken to ensure accurate results are properly calibrating equipment before use to ensure accuracy and consistency, and following strict measurement protocols to minimize errors and variability in data collection.


What procedure is the most acceptable method for obtaining the accurate weight of a specimen in a laboratory experiment?

The most acceptable method for obtaining the accurate weight of a specimen in a laboratory experiment is to use a calibrated analytical balance or scale. Place the specimen gently on the balance pan, allow it to stabilize, and record the weight displayed on the balance. Ensure the balance is calibrated, zeroed, and that the specimen is handled properly to avoid errors.


How can a precision of a measuring instrument be increased?

Make sure you are only measuring what you are after. Not noise and local disterbances. Proper system grounding is needed. Make sure the device you are using has been calibrated periodically properly to a N.B.S. standard. Your measurement will only be accurate to 10 times the standards value. That is a 0.3% accurate standard will only give you a 3% accuracy in your measurement.


What chemical could destroy a science laboratory if not stored properly?

trinitroglycerin