answersLogoWhite

0

Steel wool burns when exposed to a flame due to its high iron content. Factors that influence its combustion process include the presence of oxygen, the temperature of the flame, and the thickness of the steel wool.

User Avatar

AnswerBot

5mo ago

What else can I help you with?

Continue Learning about Chemistry

Why does steel rust and what factors contribute to the corrosion process?

Steel rusts due to a chemical reaction between iron in the steel and oxygen in the air or water. Factors that contribute to the corrosion process include exposure to moisture, salt, and acidic substances, as well as high temperatures and mechanical damage. These factors accelerate the rusting of steel by providing the necessary conditions for the oxidation reaction to occur.


What is the name of the process that transforms iron into steel?

The process that transforms iron into steel is called "steelmaking."


What conditions are needed for steel to corrode?

Steel needs to be exposed to oxygen and water in order to corrode. This exposure causes a chemical reaction that forms iron oxide, or rust, on the surface of the steel. Factors such as high humidity, saltwater, and acidic environments can accelerate the corrosion process.


How long for steel to degrade?

The rate at which steel degrades depends on the environmental conditions it is exposed to. In a humid and corrosive environment, steel can start to degrade within a few weeks or months. Factors such as exposure to water, salt, and chemicals can accelerate the degradation process. Regular maintenance and protective coatings can help slow down steel degradation.


Is rusting and combustion is same?

rusting or "corrosion" is a process where a metal is introduced to moisture. thus the metal will get rusty... combustion is a process. the combustion process is the result of fuel (of some sort) is introduced to a ignition source. i.e. take a gallon of gasoline, and within a close proximity light a match (*BOOM*) thus is combustion. the answer to your question is no, rusting and combustion are two different and entirety separate processes. these are extremely simple examples to answer your question. there are many different examples. but these are how I'd explain them to my young son, so they may be easy to understand. hope that helps, cheers. e.

Related Questions

How long does it take for a steel can to degrade and what factors contribute to its degradation process?

A steel can typically takes around 50 years to degrade, but this can vary depending on factors such as exposure to moisture, oxygen, and acidic substances. These factors can accelerate the degradation process by causing rust and corrosion on the steel surface.


Why does steel rust and what factors contribute to the corrosion process?

Steel rusts due to a chemical reaction between iron in the steel and oxygen in the air or water. Factors that contribute to the corrosion process include exposure to moisture, salt, and acidic substances, as well as high temperatures and mechanical damage. These factors accelerate the rusting of steel by providing the necessary conditions for the oxidation reaction to occur.


How long does it take for stainless steel to rust, and what factors contribute to the corrosion process?

Stainless steel can rust over time, but it typically takes years for visible corrosion to occur. Factors that contribute to the corrosion process include exposure to moisture, salt, and acidic substances, as well as scratches or damage to the protective oxide layer on the surface of the steel.


What process created steel?

The Bessemer process created steel.


What is steel corrugated pipe and it's use?

Ribbed, bendable steel pipe used on combustion engine exhaust system.


What is buoyancy factor of steel in sea water?

The buoyancy factor of steel in seawater is less than 1, meaning steel will sink in seawater due to its high density. The exact buoyancy factor will depend on the specific composition and weight of the steel. Additional factors such as surface area and volume will also influence the buoyancy of steel in seawater.


How did the development of the Bessemer process influence Great Britain's Industrial Revolution?

(Apex) It greatly reduced the cost of producing steel used in railroad construction.


What are the factors that contribute to the stiffness of stainless steel?

The factors that contribute to the stiffness of stainless steel include its composition, grain structure, and heat treatment. The amount of carbon and other alloying elements in the steel affects its stiffness. The arrangement of grains in the steel also plays a role, with smaller grains typically leading to increased stiffness. Additionally, the heat treatment process can alter the internal structure of the steel, impacting its stiffness.


What is the force required to break steel of 380N?

The force required to break steel can vary depending on the type of steel and its specific properties. However, for steel with a breaking strength of 380N, a force greater than 380N would be needed to break it. It is important to note that factors such as the steel's thickness, temperature, and any existing defects can also influence the force required to break it.


What is the name of the process that transforms iron into steel?

The process that transforms iron into steel is called "steelmaking."


Is it true that the Bessemer process played a large role in the building of the Brooklyn bridge?

The Brooklyn Bridge is made of steel. The Bessemer process made steel affordable.


What is the name of the process of transforming iron into steel?

The process of transforming iron into steel is called "steelmaking" or "steel production." It involves removing impurities from iron and adjusting the carbon content to create the desired properties in the steel.