Depending on how bad the soot is on the ring you may need to try a couple of things. Many times a jeweler will need to polish the ring to get the shine back, but you can try these things first. A solution of Mr. Clean, Ammonia, and water can be used to soak the jewelry in. This is the same solution that jewelers use in their ultra sonic to clean jewelry. You can also try using a polishing cloth to remove some of the surface soot. These suggestions only work if the soot is light. If there are stones, a jeweler will need to remove the stones and polish the area under where the stones were set. Dullness under the stones will keep the diamonds from sparkling.
Vinegar can be used to clean jewelry, but its acidity may damage certain types of jewelry, such as those with gemstones or delicate materials. It is recommended to dilute the vinegar with water and to only use it on jewelry that is not sensitive to acidic solutions. It's best to consult with a jeweler for specific cleaning recommendations based on the type of jewelry you have.
For platinum or gold, use Mr. Clean, water, and ammonia. This is what jewelers use in their ultra sonic to clean jewelry and is safe for all types of jewelry. Half Mr. Clean and water with just a little ammonia. Sterling jewelry is cleaned using either a sterling jewelry dip or baking soda and water as a paste. I would not use toothpaste. Toothpaste is abrasive and can ruin a high polish.
Alka-Seltzer can be used to clean jewelry by placing the jewelry in a glass of water with a couple tablets of the effervescent antacid. Let it soak for a few minutes to help loosen dirt and grime. Afterwards, gently scrub the jewelry with a soft brush or cloth and then rinse it thoroughly with clean water.
To clean silver tone jewelry, mix warm water and a mild soap in a bowl, then gently scrub the jewelry using a soft-bristled brush or cloth. Rinse well with clean water and dry thoroughly with a soft cloth to prevent tarnishing. Avoid using harsh chemicals or abrasive materials that can damage the jewelry's finish.
It is not recommended to clean jewelry with toothpaste as it can be abrasive and may scratch the surface of the metal or gemstone. It is better to use a jewelry cleaning solution specifically designed for the type of metal or gemstone to avoid damage.
To clean enamel jewelry I would use something non abrasive and safe on all types of fine jewelry. A solution created by mixing half Mr. Clean and water then a small amount of ammonia should work great. This is the same solution used in the ultrasonics of many jewelry stores I know of and is safe with all types of jewelry. Even the easily damaged opals can be cleaned in this solution. Allow your jewelry to soak for 15 seconds then rinse with water and dry.
Grease Lightening works great on smoke damage
Clean your jewelry with isopropyl alcohol, or at least 80% cleaning alcohol if you have that.
I have a mobile home and the furnace caught on fire and is now damaged does my homeowners insurance cover this as a replacement
A solution of half Mr. Clean and water with a small amount of ammonia can be used to clean gold jewelry. This same solution is used in the ultrasonics of many jewelry stores including chain jewelry stores. I will add a link to a full article about cleaning fine jewelry.
"HGF" or hollow gold filled jewelry is considered a fine jewelry and should be treated with the same caution when cleaning. To clean HGF jewelry a solution of Mr. clean, water, and ammonia can be used. Mix half Mr. Clean and water with a small amount of ammonia. This is safe for all types of fine jewelry and is used by many jewelry stores. Allow the jewelry piece to soak for 15 seconds in this solution then rinse with water and dry.
Vinegar can be used to clean jewelry, but its acidity may damage certain types of jewelry, such as those with gemstones or delicate materials. It is recommended to dilute the vinegar with water and to only use it on jewelry that is not sensitive to acidic solutions. It's best to consult with a jeweler for specific cleaning recommendations based on the type of jewelry you have.
The Da Vinci Jewelry I know of is considered fine jewelry and since fine jewelry needs special care I will explain how to clean fine jewelry which will be good for all types of jewelry. A solution of half Mr. Clean and water with a small amount of ammonia can be used to clean all types of fine jewelry. Soak the jewelry piece for 15 seconds then rinse in cold water and dry. This solution is used by many jewelry stores I know of and they use it for all types of jewelry including inexpensive jewelry, fine jewelry, and even opals, and emeralds. A bowl can be used, but an ultrasonic is better. Repeat if the piece is extra dirty.
You have to remove the jewelry and clean it, including the piercing.
Always make sure to clean both your jewelry and the piercings themselves with hydrogen peroxide to avoid infection. Store your jewelry in a safe and clean location. Never purchase plated jewelry.
It depends on what the jewelry is made of.
A soft cloth with alcohol or class cleaner used directly on the rhinestone is the best way to clean rhinestone jewelry.