I know that using lemon juice and salt on clothing that has rust stains works. It may work for other materials also.
You can rub a small amount of white vinegar on the stained area. If the stain is rust, it will usually react with the vinegar and turn a reddish color. Alternatively, you can try rubbing a paste of baking soda and water on the stain to see if it fizzles, which is another indication of rust.
Mix equal parts of lemon juice and borax to form a paste, then scrub the rust stain with the paste using a cloth or sponge. Let it sit for a few minutes before rinsing thoroughly with water. If the stain persists, consider using a commercial rust remover following the manufacturer's instructions carefully.
To remove a stain from an iron door, you can start by mixing a solution of equal parts water and white vinegar. Apply the solution to the stain and scrub gently with a soft brush or sponge. If the stain persists, you can also try using a commercial iron cleaner or a paste of baking soda and water. Remember to rinse off any cleaning solution thoroughly and dry the door to prevent rust.
By coating the iron with a protective layer would prevent the iron from being in contact with the moisture and oxygen in the air. However, if part of the protective layer is scraped off, the iron would rust.
You can try using rubbing alcohol, vinegar, or a mixture of baking soda and water to remove ink from plastic. Apply the solution to a cloth and gently scrub the ink stain until it lifts off the plastic surface. Rinse with water afterwards.
You can rub a small amount of white vinegar on the stained area. If the stain is rust, it will usually react with the vinegar and turn a reddish color. Alternatively, you can try rubbing a paste of baking soda and water on the stain to see if it fizzles, which is another indication of rust.
To effectively remove rust stains from concrete surfaces, you can use a mixture of vinegar and baking soda or a commercial rust remover. Apply the solution to the stain, scrub with a brush, and rinse thoroughly with water. Repeat if necessary until the rust stain is removed.
Mix equal parts of lemon juice and borax to form a paste, then scrub the rust stain with the paste using a cloth or sponge. Let it sit for a few minutes before rinsing thoroughly with water. If the stain persists, consider using a commercial rust remover following the manufacturer's instructions carefully.
The difference between normal dirt and a stain is in their difficult to wash off. Normal dirt comes off easily but a stain is a colored patch which penetrative and thus making it hard to remove.
Pull them realy hard
You might try Plastic Welding or LocTite Plastic Bonder.
yes it would be but if you rubbed very hard it could come off
Put the pants into a plastic bag and into the freezer. .... after an hour the gum whill be crystalized and can be scratched off the fabric.
To remove a stain from an iron door, you can start by mixing a solution of equal parts water and white vinegar. Apply the solution to the stain and scrub gently with a soft brush or sponge. If the stain persists, you can also try using a commercial iron cleaner or a paste of baking soda and water. Remember to rinse off any cleaning solution thoroughly and dry the door to prevent rust.
There is almost no way to do this without destroying the plastic. As you didn't say WHAT KIND of plastic, it's hard to be more help.
Yes, stain can come off wood when you are cleaning it, depending on the type of stain and the cleaning method used.
By coating the iron with a protective layer would prevent the iron from being in contact with the moisture and oxygen in the air. However, if part of the protective layer is scraped off, the iron would rust.