0
What else can I help you with?
What is the weight Sulfuric Acid per gallon?
Weight of 25% sulfuric acid per gallon
How to prepare 0.5M sulfuric acid?
To prepare 0.5M sulfuric acid, you would mix concentrated sulfuric acid with water in the correct ratio. For example, to make 500 mL of 0.5M sulfuric acid, you could mix 25 mL of concentrated sulfuric acid with 475 mL of water. Always remember to add acid to water slowly to avoid splashing and heat generation.
Between nitric acid and sulfuric acid which one is more acidic?
Sulfuric acid is more acidic than nitric acid because sulfuric acid is a strong acid that can donate two protons (H+) in solution, while nitric acid can only donate one proton. This makes sulfuric acid have a lower pH and higher acidity compared to nitric acid.
Jorge has four liters of 30 percent acid solution how much water should he add to make 25 percent acid solution'?
Jorge needs to add 2 liters of water to the 30% acid solution to make a 25% acid solution. This can be calculated using a dilution formula: initial acid amount / final total amount = final acid concentration.
Boiling point of diluted sulfuric acid?
The boiling point of diluted sulfuric acid, typically consisting of around 10-25% sulfuric acid in water, ranges from 108 to 120 degrees Celsius, depending on the exact concentration. This is lower than the boiling point of pure sulfuric acid, which is 337 degrees Celsius.
What is the weight Sulfuric Acid per gallon?
Weight of 25% sulfuric acid per gallon
How to prepare 0.5M sulfuric acid?
To prepare 0.5M sulfuric acid, you would mix concentrated sulfuric acid with water in the correct ratio. For example, to make 500 mL of 0.5M sulfuric acid, you could mix 25 mL of concentrated sulfuric acid with 475 mL of water. Always remember to add acid to water slowly to avoid splashing and heat generation.
The electrolyte in a battery has 25 acid sulfuric and 75 water what should be the purity of the acid?
the purity of the acid is 25%
A chemist has one solution which is 50 percent acid and a second solution which is 25 percent acid how much of each should be mixed to make a 10 liters of a 40 percent acid solution?
6 litres of 50% + 4 litres of 25%
Between nitric acid and sulfuric acid which one is more acidic?
Sulfuric acid is more acidic than nitric acid because sulfuric acid is a strong acid that can donate two protons (H+) in solution, while nitric acid can only donate one proton. This makes sulfuric acid have a lower pH and higher acidity compared to nitric acid.
Jorge has four liters of 30 percent acid solution how much water should he add to make 25 percent acid solution'?
Jorge needs to add 2 liters of water to the 30% acid solution to make a 25% acid solution. This can be calculated using a dilution formula: initial acid amount / final total amount = final acid concentration.
Boiling point of diluted sulfuric acid?
The boiling point of diluted sulfuric acid, typically consisting of around 10-25% sulfuric acid in water, ranges from 108 to 120 degrees Celsius, depending on the exact concentration. This is lower than the boiling point of pure sulfuric acid, which is 337 degrees Celsius.
How to make 4.5 m H2SO4?
To make 4.5 M H2SO4 from concentrated sulfuric acid (98% H2SO4), you would need to dilute it with water. Calculate the volume of concentrated sulfuric acid needed based on the final volume desired, then add water to reach the total volume. Always remember to add acid to water slowly and carefully to avoid splashing or overheating.
Mary is experimenting with chemicals in the laboratory She mixes a solution that is 10 percent acid with a solution that is 25 percent acid How much of the 10 percent acid solution will be needed to m?
16 2/3 liters
How many liters of a 20 percent solution of acid should be added to 10 liters of a 30 percent solution of acid to obtain a 25 percent solution?
10 liters.
How do you make 25 into a percent?
Multiply by 100: 25 x 100 = 2,500%
What is 25 percent of 25 percent equals to?
25 percent of 25 percent = 0.0625
