answersLogoWhite

0

To make phenolphthalein indicator solution from powder, dissolve a small amount of phenolphthalein powder (about 0.1g) in 100mL of ethanol or 95% ethanol and 5% water solution. Stir the mixture until the powder is completely dissolved. This will give you a pink indicator solution suitable for titrations.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

Which indicator is suitable for the titration of washing soda against HCL and why?

Phenolphthalein is a suitable indicator for titration of washing soda (sodium carbonate) against hydrochloric acid. This indicator changes color in the pH range of 8.2 to 10, making it ideal for this titration since the end point occurs when all the sodium carbonate has reacted to form sodium chloride and carbonic acid, resulting in a pH above 8.2.


How do you prepare phenolphthalein indicator for titration?

Upon swallowing such a solution, you would collapse almost immediately and lose consciousness within 10-20 seconds. Death would follow in a matter of minutes. With such a massive dose taken, any medical assistance, no matter how aggressive, would prove futile. A gram mixed in with about 4 to 8 oz water would render you unconscious within 15-45 sec (depending on your body) and without medical attention you would be dead within 30-45 min.


How to make Methyl Orange Indicator from the powder?

To make Methyl Orange Indicator solution, dissolve Methyl Orange powder in distilled water at a concentration of about 0.1%. Stir thoroughly until the powder is completely dissolved. Adjust the pH of the solution if needed by adding drops of dilute sodium hydroxide or hydrochloric acid until the desired color change is achieved.


Where can you buy phenolphthalein powder?

sigmaaldrich.com is a chemical supply site, its where i buy all of my chemistry stuff. you need some accreditation to buy many things but something as harmless as phenolphthalein should be accessable


How to calculated NaOH concentration be affected if the colour change in the solution is too dark?

I presume you are titrating a standardized solution of (eg) HCl with NaOH to determine the molarity of the alkali. You would normally use an indicator which will change colour at the end point (eg colourless to pink for phenolphthalein). If the solution is very coloured to begin with it can mask the colour change and so make the end point hard to see and lead to a miscalculation of molarity.

Related Questions

Which indicator is suitable for the titration of washing soda against HCL and why?

Phenolphthalein is a suitable indicator for titration of washing soda (sodium carbonate) against hydrochloric acid. This indicator changes color in the pH range of 8.2 to 10, making it ideal for this titration since the end point occurs when all the sodium carbonate has reacted to form sodium chloride and carbonic acid, resulting in a pH above 8.2.


How do you prepare phenolphthalein indicator for titration?

Upon swallowing such a solution, you would collapse almost immediately and lose consciousness within 10-20 seconds. Death would follow in a matter of minutes. With such a massive dose taken, any medical assistance, no matter how aggressive, would prove futile. A gram mixed in with about 4 to 8 oz water would render you unconscious within 15-45 sec (depending on your body) and without medical attention you would be dead within 30-45 min.


How do you make up a solution of phenolphthalein from a whit solid of phenolphthalein?

Dissolve 0.1g of the powder in ethanol and dilute with distilled water upto 100 cm3


How do you make phenophtalene indicator from the powder?

1. - Weigh out 0.5 g of phenolphthalein. 2. - Prepare a 50% ethanol (ethyl alcohol) solution consisting of 50ml ethanol and 50 ml water. 3. - Dissolve the phenolphthalein thoroughly in the 50% ethanol solution. 4. - Use from a bottle fitted with an eye dropper. Store the rest in a stoppered bottle.


How do make powder eriochome black-T indicator?

Crush the material in a mortar.


How to make a turmeric indicator?

buy turmeric powder then take a glass of distilled water add 1 teaspoon turmeric powder to it you will notice that the color of the water turns yellow this solution is your indicator


How to make Methyl Orange Indicator from the powder?

To make Methyl Orange Indicator solution, dissolve Methyl Orange powder in distilled water at a concentration of about 0.1%. Stir thoroughly until the powder is completely dissolved. Adjust the pH of the solution if needed by adding drops of dilute sodium hydroxide or hydrochloric acid until the desired color change is achieved.


Does phenolphthalein make you go unconscious?

Phenolphthalein is a chemical compound commonly used as an acid-base indicator in laboratory settings and in some laxatives. When used properly and in recommended doses, phenolphthalein is not known to cause unconsciousness. However, excessive exposure or ingestion of phenolphthalein can lead to serious health effects and should be avoided.


What happen when sodium hydroxide is added drop wise to a solution containing phenolphthalein?

When sodium hydroxide is added dropwise to a solution containing phenolphthalein, the solution will initially remain colorless. Once enough sodium hydroxide has been added to make the solution basic, the color will change from colorless to pink or purple, indicating the presence of hydroxide ions. Phenolphthalein is a pH indicator that changes color in the presence of a base.


Where can you buy phenolphthalein powder?

sigmaaldrich.com is a chemical supply site, its where i buy all of my chemistry stuff. you need some accreditation to buy many things but something as harmless as phenolphthalein should be accessable


How to calculated NaOH concentration be affected if the colour change in the solution is too dark?

I presume you are titrating a standardized solution of (eg) HCl with NaOH to determine the molarity of the alkali. You would normally use an indicator which will change colour at the end point (eg colourless to pink for phenolphthalein). If the solution is very coloured to begin with it can mask the colour change and so make the end point hard to see and lead to a miscalculation of molarity.


How do you make 1 solution phenolphthalein?

To make a 1% solution of phenolphthalein, you would typically dissolve 1g of phenolphthalein in 100mL of a suitable solvent, such as ethanol or water. Mix well until the phenolphthalein is fully dissolved to obtain the desired concentration.