answersLogoWhite

0

First take 170g of NH3 . Then dissolve in 1L of water

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Chemistry

How can a solution of ammonia be used to prepare ammonia sulphate?

A solution of ammonia can be used to prepare ammoniumsulfate by reacting it with a solution of sulfuric acid to produce a solution of ammonium sulfate, which can be dried if desired to prepare solid ammonium sulfate.


How do you prepare 1n AMMONIA solution?

To prepare a 1N ammonia solution (approximately 28% ammonia by weight), you can dilute concentrated ammonia solution (typically 28-30% ammonia by weight) with the appropriate amount of water to reach a final volume that corresponds to 1 mole of ammonia per liter (about 17 grams of ammonia in 1 liter of solution). Wear appropriate protective gear and handle ammonia with caution due to its corrosive nature and strong odor.


How would you prepare a liter of 10 percent ammonia solution from the official strong ammonia solution?

To prepare a liter of 10% ammonia solution from the official strong solution: Calculate the volume of the concentrated ammonia solution needed using the dilution formula: C1V1 = C2V2. Measure the calculated volume of the concentrated ammonia solution and add distilled water to make a total volume of 1 liter. Mix thoroughly to ensure uniform distribution.


How do you prepare 10 mM ammonia?

- Transfer 0,057 mL of 30 % ammonia solution, with the aid of a micropipette in a volumetric flask (volume 100 mL) - Add distilled (or demineralized) water up to the mark, at 20 0C - Put the stopper and stir.


How do you prepare HgNH2Cl?

To prepare HgNH2Cl, first dissolve mercury(II) chloride (HgCl2) in water. Then add aqueous ammonia (NH3) to the solution until a white precipitate of mercury(II) amine chloride (HgNH2Cl) forms. The precipitate can be filtered and washed to isolate the compound.

Related Questions

How can one prepare dilute ammonia solution?

To prepare a dilute ammonia solution, mix a small amount of concentrated ammonia solution with a large amount of water in a clean container. Always add the ammonia solution to the water slowly and carefully, as ammonia is caustic and can release fumes. It's important to wear proper protective gear such as gloves and goggles while handling ammonia.


How can a solution of ammonia be used to prepare ammonia sulphate?

A solution of ammonia can be used to prepare ammoniumsulfate by reacting it with a solution of sulfuric acid to produce a solution of ammonium sulfate, which can be dried if desired to prepare solid ammonium sulfate.


What type of gases are used to prepare Ammonia gas?

Nitrogen and hydrogen


How do you prepare 1n AMMONIA solution?

To prepare a 1N ammonia solution (approximately 28% ammonia by weight), you can dilute concentrated ammonia solution (typically 28-30% ammonia by weight) with the appropriate amount of water to reach a final volume that corresponds to 1 mole of ammonia per liter (about 17 grams of ammonia in 1 liter of solution). Wear appropriate protective gear and handle ammonia with caution due to its corrosive nature and strong odor.


What colour would ammonia turn if universal indicator is added?

The pH of the base ammonia is, depending on its concentration between 11.1 (0.1M) and 12.1 (10M) so the color of the most common Yamada's Universal Indicator will be purple (or blue if pH < 11, ready to use household ammonia)


How tall is Mount Porcupine?

10M 10M 10M


Can you prepare ammonia using calcium oxide and ammonium chloride?

Yes. Ammonium salts such as ammonium chloride will react with a strong base to yield ammonia.


How would you prepare a liter of 10 percent ammonia solution from the official strong ammonia solution?

To prepare a liter of 10% ammonia solution from the official strong solution: Calculate the volume of the concentrated ammonia solution needed using the dilution formula: C1V1 = C2V2. Measure the calculated volume of the concentrated ammonia solution and add distilled water to make a total volume of 1 liter. Mix thoroughly to ensure uniform distribution.


What is 1 dam3 to m3?

1 dam3 = 10m*10m*10m = 1000 m3.


What is 1.5-10m?

1.5-10m = -8.5


What is 16m-10m?

16m-10m = 6


How do you prepare ammonium chloride?

Mix ammonia with a solution of hydrochloric acid, then evaporate the solution. The remaining salt is what you want.