For 1 Liter you should take 88.8 mL concentrated HCL (be carefull) and add it to 900 mL water, and finally - after mixing- fill this up to 1000 mL with distilled water. (REMEMBER: ALWAYS ADD ACID TO WATER! -
1N in 250 ml : add 22.2 mL to about (or less than) 225 mL water and dilute to final volume = 0.25L
Molarity = moles of solute/Liters of solution ( 50 mL = 0.05 Liters )
1 M HCl = X moles HCl/0.05 Liters
= 0.05 moles HCl (36.458 grams/1 mole HCl)
= 1.8 grams HCl
============Add this mass HCl to your 50 mL opf solution.
Take 50 ml from the 10 N HCl solution and then dilute it to 500 ml with water.
Mix 4,49 mL HCl 35 % with distilled water at 20 oC up to 500 mL in a volumetric flask.
10.82
Prepare HCl 1 M by HCl concentration 37 % HCl concentration 37 % have density =1.19 g/ml HCl 1 M use HCl 37 % 82.81 ml make volume with water to 1 liter
7.3gm
You drop conc. HCl into conc. H2SO4 - this releases HCl gas which you can bubble through dry ether... Or, you use an HCl cylinder.
44.5 ml HCl TAKE AND DILUTE UP TO 1000 ML WATER MAKE A 0.5 M HCl SOLUTION
10.82
Prepare HCl 1 M by HCl concentration 37 % HCl concentration 37 % have density =1.19 g/ml HCl 1 M use HCl 37 % 82.81 ml make volume with water to 1 liter
7.3gm
You drop conc. HCl into conc. H2SO4 - this releases HCl gas which you can bubble through dry ether... Or, you use an HCl cylinder.
100 M HCl don't exist.
44.5 ml HCl TAKE AND DILUTE UP TO 1000 ML WATER MAKE A 0.5 M HCl SOLUTION
N10 HCl would be 10 M HCl. You might mean N/10 which would be 0.1 M. (N or normal is an old-fashioned way to define chemical concentrations. Most chemists prefer M or molar concentrations.) Just take some higher-concentration HCl and dilute it to get the desired concentration. Use the dilution formula C1V1 = C2V2 to figure out how much high-concentration HCl to use for the volume of dilute HCl you want to make. If anything here doesn't make perfect sense, you probably shouldn't be working unsupervised with chemicals, and if you don't know what HCl is then you definitely shouldn't do whatever it is you are trying to do. 10 M HCl is a caustic liquid that gives off caustic vapors so wear goggles and be careful with it.
To prepare 0.1M methanolic HCl: 8ml water in 1000ml vol. flask. slowly add 8.6ml HCl. vol. make upto mark with methanol.
1.21 g Tris-HCl, QS water to 1L. Scale appropriately.
6g Tris HCl + 100ml dH2O, pH 6.8
520 ml of HCl in 480 ml of water=1000ml = 5 N
Preparing 1N HCl for 1L. 1N=1M in HCl. Conc. HCl= 12M M1V1=M2V2 12*V1=1*1000 V1=1000/12 V1=83.33ml 1N HCl= 83.33ml of Conc. HCl in 1L of water 2N HCl= 167ml of Conc. HCl in 1L of water.