Use half a cup of Ammonia to one gallon of hot water. Thereafter, use a piece of rag to brush the residue off the floor.
No, mixing Lysol and ammonia can create a toxic gas. To remove Mop N Glo from a slate floor, try using a mixture of warm water and vinegar or a specialized floor cleaner designed for slate surfaces. Always test a small inconspicuous area first to ensure the solution does not damage the floor.
No, Spray 'n Wash does not contain bleach. It is a stain remover that uses enzymes to break down and remove stains from fabrics without bleaching them.
Spray N Wash was invented by Texize, located in Greenville, SC. But Texize is no more either. All brands but Glass Plus and Spray N Wash were sold to SC Johnson. Those two were sold to Reckitt.
To remove azo dyes from fabric, you can try soaking the fabric in a mixture of water and white vinegar, then washing it with a detergent containing enzymes. Another option is to use a commercial color remover specifically designed for fabric dye removal. Follow the manufacturer's instructions carefully to avoid damaging the fabric.
The wax and the wick burn, but not completely, the unburnt part being mainly carbon n the form of very small particles. These are quite hot and glow white, yellow, and red, and are resonsible for the 'flame' and its colour. After the particles leave the immediate area of the flame they cool down and don't glow any more. They are now the smoke.
You can but it isn't going to do much, laminate is designed to have a low luster/Shine and the mop & glow will likely look more streaky than shiny.. you are trying to shine a floor that isn't supposed to shine... It will leave a heavy residue and make the floor look extremely dirty.
MOP AND GLOW MANUFACTURER NAME: Reckitt Benckiser
After trying many things, my husband finally used amonia and water and a stiff scrub brush...then a towel to wipe is down. That did the trick after lots of elbow grease on his hands a knees! What a mess...will never use Mop n Glo again!
My suggestion is no. We just moved into a home that we are renting and we had layers of build-up. It was wax build-up from the Mop n Glow that was used to clean the floors, plus the cleaner attracted more dirt. Just layers of wax and dirt. The floor was awful. I had a professional cleaner come in and clean it for me. The guy who cleaned my floors suggested Swiffer Jet mop and cleaner which I love. He also suggested buying a neutralizer type cleaner which can be found at Lowe's or Home Depot. Dish detergent can also be used on the floors as a degreaser.
California Dreams - 1992 Mop n' Pop 5-4 was released on: USA: 28 September 1996
use ammonia,full strength,be sure to have proper ventilation,as ammonia can harm you if you are in an enclosed area.
Buy a glow in a dark hair color die n die the dolls hair and it will glow
No, mixing Lysol and ammonia can create a toxic gas. To remove Mop N Glo from a slate floor, try using a mixture of warm water and vinegar or a specialized floor cleaner designed for slate surfaces. Always test a small inconspicuous area first to ensure the solution does not damage the floor.
brilliance, brightness, splendor, glow, elegance = nitor (2) -oris m.fire, glow, heat = incendium -i n. ( of passion)glow, glitter = ignis -is m. ( in gen.)glow of passion = ignis -is m.the fire or glow of passion= flamma
NO! Leaves a white dull film.
no not if its a d.i
i think it wont glow .