0
How do you separate silicon dioxide ammonium chloride sodium chloride from a mixture?
Heat it until the ammonium chloride sublimes. Then add distilled water to what's left, stir, allow the solid to settle to the bottom of the dish, and decant the liquid. Repeat that 3 times. That'll extract the sodium chloride (salt) from the silicon dioxide (sand), because the NaCl is soluble in water. Then heat the salt water solution carefully until all the water is evaporated. Then heat the sand to dry it out.
What else can I help you with?
How do you separate ammonium chloride from a mixture of ammonium chloride and potassium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and potassium chloride, you can use the process of sublimation. Ammonium chloride sublimes at a lower temperature compared to potassium chloride. By heating the mixture, the ammonium chloride will directly change from a solid to a gas, leaving behind the potassium chloride. The resulting gas can be condensed back into solid form for collection.
How can you separate a mixture of naphthalene and ammonium chloride?
One way is to slurry the solid mixture with water. The ammonium chloride will dissolve and the naphthalene will not. Ammonium chloride can then be recovered by evaporating the water solution of it that is formed.
How can you separate a mixture of ammonium chloride and potassium chloride?
A mixture of ammonium chloride and potassium chloride can be separated using the process of sublimation. You must also note that both these substances are sublimable. Well this technique is quite feasible in this case as the sublimable temperatures of ammonium and potassium chloride differ widely. Between the two, ammonium chloride has lower sublimable temperature. Therefore, it sublimes first followed by potassium chloride.
How to separate a mixture of sodium chloride and ammonium chloride?
Sodium chloride and ammonium chloride can be separated either by sublimation or filtration or crystallization. Sublimation can be found on this site ------------ http://www.lenntech.com/Chemistry/sublimation.htm. I personally think that this method is the easiest.
What method could be used to separate a mixture of barium sulphate and ammonium chloride and lead chloride?
One method to separate a mixture of barium sulfate and ammonium chloride, and lead chloride would be to use precipitation. By adding a solution of sodium sulfate (Na2SO4), barium sulfate will precipitate out due to its low solubility. The remaining solution can then be filtered to separate the lead chloride from the ammonium chloride.
How do you separate ammonium chloride and common salt?
Heating the mixture ammonium chloride is decomposed after 315 oC.
How do you separate ammonium chloride from a mixture of ammonium chloride and potassium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and potassium chloride, you can use the process of sublimation. Ammonium chloride sublimes at a lower temperature compared to potassium chloride. By heating the mixture, the ammonium chloride will directly change from a solid to a gas, leaving behind the potassium chloride. The resulting gas can be condensed back into solid form for collection.
How can you separate a mixture of ammonium chloride and salt?
By the process of sublimation.
How can you separate ammonium chloride and copper oxide?
Ammonium chloride is water-soluble whereas copper oxide is not. You can separate them by dissolving the mixture in water, then filtering it. The filtrate solution will contain ammonium chloride and the residue will contain copper oxide.
How can you separate a mixture of naphthalene and ammonium chloride?
One way is to slurry the solid mixture with water. The ammonium chloride will dissolve and the naphthalene will not. Ammonium chloride can then be recovered by evaporating the water solution of it that is formed.
How can you separate a mixture of ammonium chloride and potassium chloride?
A mixture of ammonium chloride and potassium chloride can be separated using the process of sublimation. You must also note that both these substances are sublimable. Well this technique is quite feasible in this case as the sublimable temperatures of ammonium and potassium chloride differ widely. Between the two, ammonium chloride has lower sublimable temperature. Therefore, it sublimes first followed by potassium chloride.
What is the process of separating ammonium chloride from ammonium chloride and sodium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and sodium chloride, you can dissolve the mixture in water to form a solution. Then, heat the solution to evaporate the water, leaving behind solid ammonium chloride due to its lower melting point compared to sodium chloride. This process is known as crystallization.
How to separate a mixture of sodium chloride and ammonium chloride?
Sodium chloride and ammonium chloride can be separated either by sublimation or filtration or crystallization. Sublimation can be found on this site ------------ http://www.lenntech.com/Chemistry/sublimation.htm. I personally think that this method is the easiest.
Separating a mixture of iodine ammonim chloride and barium chloride?
first add water to mixture the ammonium chloride and barium chloride dissolve in the water but the iodine does not. filter out the iodine using filtration then use fractional crystallization to separate the ammonium chloride and barium chloride and water
Why should you use sublimation to separate the mixture of salt and ammonium chloride?
Because ammonium chloride can be removed from salt by sublimation (at a given temperature).
How do you separate a dry mixture of ammonium chloride iron sugar and potassium iodide and obtain a dry sample of iron and ammonium chloride?
Do Not Kow
What method could be used to separate a mixture of barium sulphate and ammonium chloride and lead chloride?
One method to separate a mixture of barium sulfate and ammonium chloride, and lead chloride would be to use precipitation. By adding a solution of sodium sulfate (Na2SO4), barium sulfate will precipitate out due to its low solubility. The remaining solution can then be filtered to separate the lead chloride from the ammonium chloride.
