Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.
By using a magnet to separate the iron filings, you'd be left with the sulfur and sand mix. Selecting a solvent for the sulfur will allow you to dissolve the sulfur, and then all you have to do is put the sand in a filter and wash the sulfur through with the solvent.
you can easily remove iron with magnet. then if you do not care about the sulfur you can set it on fire, and what is left will be pure sand. If you do care about sulfur i don't think i can help you.
To separate a mixture of iron filings, sand, and camphor, you can use a magnet to attract the iron filings, leaving the sand and camphor behind. Then, you can dissolve the camphor in water as it is soluble, allowing the sand to settle at the bottom. Finally, you can filter out the sand to obtain separate components.
One way to physically remove iron filings from sand is to use a magnet. Pass the magnet over the mixture to attract the iron filings, leaving the sand behind. Alternatively, you could use a sieve to separate the larger iron filings from the smaller sand particles.
To separate a mixture of sand, iron filings, and salt, you can use a magnet to remove the iron filings, then dissolve the salt in water and filter the sand out. Lastly, evaporate the water to obtain the salt.
By using a magnet to separate the iron filings, you'd be left with the sulfur and sand mix. Selecting a solvent for the sulfur will allow you to dissolve the sulfur, and then all you have to do is put the sand in a filter and wash the sulfur through with the solvent.
First, place the sulfur, sand and iron filings in a plastic container. Next, use a magnet to remove the iron filings from the sulfur-sand mixture and surely,the iron filings will connect to the magnet, leaving the sulfur and sand behind.
you can easily remove iron with magnet. then if you do not care about the sulfur you can set it on fire, and what is left will be pure sand. If you do care about sulfur i don't think i can help you.
To separate a mixture of iron filings, sand, and camphor, you can use a magnet to attract the iron filings, leaving the sand and camphor behind. Then, you can dissolve the camphor in water as it is soluble, allowing the sand to settle at the bottom. Finally, you can filter out the sand to obtain separate components.
because the iron can be picked up by a magnet
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
This can be done by the processs of magnetism. Holding amagent near the mixture will cause the iron filings to be attracted out of the sand.
One way to physically remove iron filings from sand is to use a magnet. Pass the magnet over the mixture to attract the iron filings, leaving the sand behind. Alternatively, you could use a sieve to separate the larger iron filings from the smaller sand particles.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
You use a magnet because iron fillings are magnetic.
To separate a mixture of sand, iron filings, and salt, you can use a magnet to remove the iron filings, then dissolve the salt in water and filter the sand out. Lastly, evaporate the water to obtain the salt.
yes, with a magnet