through the process of smelting ore
Ore is mined from the ground in rock or particle form and then processed using many different techniques.
The most basic form of smelting involves the utilization of the different melting points of metal, allowing a smelter to heat ore to a desired temperature and melt out the desired product. This metal is then refined.
To extract a metals from the ground you use the method of electricity or carbon. It depends on how reactive the metal is. If the metal is highly reactive it is extracted by electrolysis through an electric current. It makes the process very expensive. This is why this process is only done on highly reactive metals. Less reactive metals are extracted with the process of reduction and carbon. They do this by taking the oxygen from the substance. This extraction is not as expensive but it can only be used on less reactive metals.
well metal is apart of earth from composting see metal is made out of dirt
The ground, it is first a mineral then it turns into a metal. very heavy
A metal Surface being ground is a physical change, not a chemical change.
ground
fire
Hydrochloric acid increases the rate of oxidation of a metal such as magnesium.
Minerals found in the ground.
A pedestal in a footing carries the load from the metal column to the footings below ground. The pedestal touches the ground so the metal does not come in contact with the soil.
The ground, it is first a mineral then it turns into a metal. very heavy
I assume you are asking (Where do metals come from) Metal comes from ore deposits in the ground, and mountains that are smelted with other ores and produce metal that can be worked and shaped and cut into the various metal items you can find around your house and town.
we mine metal in ground
we mine metal in ground
In any distribution panel there are individual bars for each termination. The ground buss is in direct contact with the metal enclosure. The neutral is isolated from the metal enclosure. The only place where the two come into contact with each other is where a bonding screw protrudes through the neutral bar and into the metal enclosure.
Connect the ground wire to the metal box.
In any distribution panel there are individual bars for each termination. The ground buss is in direct contact with the metal enclosure. The neutral is isolated from the metal enclosure. The only place where the two come into contact with each other is where a bonding screw protrudes through the neutral bar and into the metal enclosure.
A metal Surface being ground is a physical change, not a chemical change.
Extracting a metal oxide from the ground
we mine metal in ground