To convert a metric ton of fuel oil with 3.5% sulfur content to barrels, you would need to know the specific gravity of the fuel oil. The conversion factor will depend on the density of the fuel oil, which can vary. It is recommended to consult a fuel oil conversion chart or use a specific formula based on the density of the fuel oil being used.
Approximately 520 liters of LPG are found in a metric tonne.
One metric ton of LPG is equal to approximately 284.3 gallons.
It doesn't make any difference whether you're weighing cement, coffee or tennis balls... One metric tonne will always be 1,000 kilogrammes !
Approximately 1190 liters of tri-ethylene glycol are present in 1 metric ton.
There are 1,000,000,000 milligrams in a metric tonne.
7.7652
To convert metric tons of jet fuel to barrels, you can use an approximate conversion factor: 1 metric ton of jet fuel is roughly equivalent to 7.5 barrels. Therefore, 125,000 metric tons of jet fuel would be approximately 937,500 barrels (125,000 x 7.5 = 937,500). Keep in mind that this is an estimate and actual values may vary slightly based on the specific density of the fuel.
There are approximately 7.33 barrels in 1 metric ton (MT) of diesel fuel.
The conversion of jet fuel from metric tons to barrels typically varies slightly based on the specific type of jet fuel, but a common estimate is that one metric ton of jet fuel is approximately equivalent to 7.5 to 8 barrels. This is based on the density of jet fuel, which averages around 0.8 to 0.85 kg/L. Therefore, for practical purposes, using an average of 7.5 barrels per metric ton is a widely accepted figure.
One metric ton (mt) of jet fuel is approximately equivalent to 7.4 barrels. This conversion can vary slightly depending on the specific density of the jet fuel, but the general estimate is around this value. Therefore, for practical purposes, you can use this ratio for conversions between metric tons and barrels of jet fuel.
Well, isn't that a fascinating question! You see, in the world of jet fuel, there are about 7.33 barrels in one metric ton. Just imagine all the amazing journeys those barrels of fuel can help power through the sky! Keep exploring and asking questions, there are so many wonderful things to learn in this world.
One metric ton (Mt) of diesel fuel is approximately equivalent to about 7.4 barrels. This conversion can vary slightly based on the specific density of the diesel, but the general estimate is based on an average density of diesel fuel. Therefore, if you have a metric ton of diesel, you can expect to have around 7.4 barrels.
i barrel = ?? Metric tonnes
7.2 barrels are equal to 1 metric ton. So the answer is 360,000 barrels.
Assuming 1 metric ton of crude oil ~ 7.33 barrels them 20 metric tons of crude oil ~ 20 x 7.33 barrels =146.60 barrels of crude oil
7.6 barrels of jet fuel is in one ton
To convert metric tons of oil to barrels, you can use the approximate conversion factor that 1 metric ton of crude oil is roughly equivalent to 7.33 barrels. Therefore, 50,000 metric tons would be about 366,500 barrels (50,000 x 7.33). Keep in mind that this conversion can vary slightly based on the type of oil.