27.03 mm^3 of air
The amount of LPG low-pressure gas required to melt 300kg in a furnace depends on the efficiency of the furnace and the heating value of the LPG. It is recommended to consult a professional to calculate the precise amount needed for your specific setup.
Yes LPG in gas phase is heavier than Air.
The blue color of LPG gas flames is due to complete combustion. When LPG burns efficiently, it produces a blue flame because all the carbon in the fuel is fully oxidized to carbon dioxide, resulting in a clean burn. If there are impurities or incomplete combustion, the flame may appear yellow or orange due to the presence of unburned carbon particles.
LPG (liquefied petroleum gas) is heavier than air, so it tends to sink and accumulate at lower levels. This is because of its molecular weight, which is higher than that of the surrounding air, causing it to flow downward and collect at ground level. This property makes it important to handle and store LPG with proper ventilation to prevent any potential hazards.
The vapor density of LPG (liquefied petroleum gas) typically ranges from 1.5 to 2.0 times that of air, depending on the specific composition of the gas. This means that LPG vapors are heavier than air, and can accumulate in low-lying or enclosed areas, increasing the risk of fire or explosion if not properly ventilated.
Mains gas is Natural gas or methane CH4stored gas/ bottle gas is LPG or Liquefied petroleum gasOxygen from the air is also required for these to burn.
No, a diesel engine will not burn LPG. It would destroy a diesel engine. A gasoline engine can, with some modifications, burn LPG.
2.75kpa, LPG burns 102MJ/h per m3
The amount of LPG low-pressure gas required to melt 300kg in a furnace depends on the efficiency of the furnace and the heating value of the LPG. It is recommended to consult a professional to calculate the precise amount needed for your specific setup.
Yes LPG in gas phase is heavier than Air.
The amount of LPG gas required to boil water for one cup of tea is relatively small, typically around 0.1 to 0.2 kg of LPG. This estimate can vary based on the efficiency of the stove, the initial temperature of the water, and the specific boiling time. Generally, boiling about 200-250 ml of water for tea may use around 10-15 grams of LPG.
25.0
Some versions of the Mazda Axela come with a factory fitted LPG. Most of these models are available in Korea and Japan where the LPG conversion is required by law.
The blue color of LPG gas flames is due to complete combustion. When LPG burns efficiently, it produces a blue flame because all the carbon in the fuel is fully oxidized to carbon dioxide, resulting in a clean burn. If there are impurities or incomplete combustion, the flame may appear yellow or orange due to the presence of unburned carbon particles.
LPG (liquefied petroleum gas) is heavier than air, so it tends to sink and accumulate at lower levels. This is because of its molecular weight, which is higher than that of the surrounding air, causing it to flow downward and collect at ground level. This property makes it important to handle and store LPG with proper ventilation to prevent any potential hazards.
The vapor density of LPG (liquefied petroleum gas) typically ranges from 1.5 to 2.0 times that of air, depending on the specific composition of the gas. This means that LPG vapors are heavier than air, and can accumulate in low-lying or enclosed areas, increasing the risk of fire or explosion if not properly ventilated.
Petrol, diesel, LPG, CNG - there are fossil fuels and when you burn them you emmit enormous quantities of CO2. Biofuels - biodiesel (the most popular) is oil from common plants or oil from a restaurant kitchen. When you burn it, it does not emmit these huge quantities of CO2.