Approximately 50 pounds.
A 5 gallon Sprite bib weighs approximately 45-50 pounds when full.
Yes, a bucket full of sand is considered a solid because the sand particles are closely packed together and have a definite shape and volume. Solids have a fixed shape and volume, which sand in a bucket exhibits.
No, both buckets would contain approximately the same number of water molecules. Each molecule in a bucket of water from a single source (such as tap water or ocean water) would contain the same number of atoms.
An XL50 oxygen cylinder weighs approximately 16 pounds when full.
A full 5-gallon propane tank typically weighs around 38-40 pounds, including the weight of the propane gas itself. However, the actual weight can vary slightly depending on the specific tank and manufacturer.
The weight of a 5-gallon paint bucket can vary depending on the type of paint and materials used in the bucket. On average, a 5-gallon paint bucket can weigh between 40-60 pounds when full of paint.
Yes, you can measure exactly 5 gallons using the two buckets. First, fill the 7-gallon bucket completely. Then, pour water from the 7-gallon bucket into the 4-gallon bucket until the smaller bucket is full; this will leave you with 3 gallons in the 7-gallon bucket. Next, empty the 4-gallon bucket and pour the 3 gallons from the 7-gallon bucket into it. Finally, fill the 7-gallon bucket again and pour into the 4-gallon bucket until it is full, which will leave you with exactly 5 gallons in the 7-gallon bucket.
you fill the 3 gallon bucket into the 5 gallon bucket twice 2 *3 6 gallons but the 5 gallon will only overflow once it hits 5 gallons. You get the 1 gallon half in the 3 gallon bucket and dump the water out of the 5 gallon bucket. You pour the 1 gallon left from the 3 gallon bucket into the 5 gallon bucket and then refill the 3 gallon bucket and put the 3 gallons in making 4 gallons.
Water weighs 8.34 lbs per gallon, so 5 would weigh 41.7 lbs.
First, fill up the 5 gallon bucket. Then, pour the contents in the 5 gallon bucket into the 3 gallon bucket. This leaves 2 gallons left in the 5 gallon bucket. Pour the 2 gallons into the 3rd container. Now, fill the 5 gallon bucket again and pour the full 5 gallons into the 3rd container. This gives you 7 gallons.
Dont know
A gallon of water weighs about 8.34 pounds. So, a 50 gallon water heater full of water would weigh approximately 417 pounds.
A full mop bucket typically weighs between 20 to 30 pounds, depending on the size of the bucket and the amount of water and cleaning solution it contains. Standard mop buckets usually hold around 3 to 5 gallons of liquid, with each gallon weighing approximately 8.34 pounds. Therefore, the total weight can vary based on the specific contents and the bucket's design.
To calculate the number of quarters in a 5-gallon bucket, we first need to determine the volume of a quarter. A quarter has a diameter of 0.955 inches and a thickness of 0.069 inches, giving it a volume of approximately 0.102 cubic inches. A 5-gallon bucket can hold up to 1155 cubic inches of quarters (5 gallons = 1155 cubic inches). Therefore, dividing the total volume of the bucket by the volume of a quarter (1155 cubic inches / 0.102 cubic inches) gives us approximately 11,323 quarters that can fit in a full 5-gallon bucket.
foolish!!!!!!!!!!!!!!!!!!1 at its brim we'll come to knw when d bucket is full stupid!!!!!!!!!!!!!!!!!!!! (Yes you are). Actually the correct answer is one inch below the brim. This was calculated by weight over several five gallon buckets.
A bucket of water is heavier than a bucket of snow when both are of the same size. This is because water is denser than snow; snow contains a significant amount of air, which makes it lighter. Thus, even a full bucket of snow will weigh less than a full bucket of water.
A standard garden bucket of sand typically weighs around 50 pounds when full.