0
1,000,000 grams of sulphuric acid.
one mole of sulphuric acid is 94.1 grams
1,000,000 divided by 94.1 is 10627
if you take two of this amount to make the sulphur multiplyable we get 10625
we then do 10625 X (H4S2O8) which gives us S21250
21250 divided by 32.1 (mass of sulphur) equals 662
there are 662 grams of sulphur in one tonne of sulphuric acid.
What else can I help you with?
How is sulfur relate to sulfuric acid?
All acids contain hydrogen and oxygen. Different acids have different non-metal elements to give them their characteristic name. Sulphur/ Sulphuric Acid H2SO4 Sulphur / Sulphurous Acid H2O3 Nitrogen/Nitric Acid HNO3 Nitrogen . Nitrous Acid HNO2 Phosphorus/Phosphoricic Acis H3PO4 Chlorine/ Hydrochloric Acid HCl (Note no oxygen) However Chlorine/Hypochlorus acid HClO
How much water is in sulfuric acid?
In concentrated sulfuric acid usually about 1%
How many hydrogen atoms are in a particle of sulfuric acid?
Sulfuric acid is H2SO4. That's 2 hydrogens, 1 sulfur, and 4 oxygens, for a total of 7 atoms. 3 molecules of sulfuric acid would simply have three times of each - 6, 3, and 12 respectively.Unless you mean how many atoms of each are there in 3 moles of sulfuric acid. That's a much different question.
What is the difference between carbonic acid and sulfuric acid?
Sulfate is a combination of oxygen and sulfur whereas sulfide is the negative ion of sulfur alone. Both are negative ions, anions.Both sulfur and oxygen are "hungry" for electrons. When they make a chemical bond it is to gain a share of electrons to put them into a more stable electron mode (or configuration). They each have six electrons in their outer energy level and they can also share electrons with each other. The sulfate ion that results is SO42- it allows both sulfur and oxygen to share enough electrons to have a stable electron configuration.Sulfur can also just gain two electrons to achieve a stable outer electron configuration, S2-. Compounds like H2S (rotten egg gas), hydrogen sulfide is a compound using sulfide.Na2SO4 , sodium sulfate or H2SO4 (sulfuric acid) are compounds using sulfate.P.S. the suffix '-ate' in chemistry indicates that there is oxygen present whereas '-ide' tells us that only the element alone is present in forming the ion.
How much does a ton of sulfuric acid weigh in lbs?
A ton of sulfuric acid weighs 4,000 pounds.
How is sulfur relate to sulfuric acid?
All acids contain hydrogen and oxygen. Different acids have different non-metal elements to give them their characteristic name. Sulphur/ Sulphuric Acid H2SO4 Sulphur / Sulphurous Acid H2O3 Nitrogen/Nitric Acid HNO3 Nitrogen . Nitrous Acid HNO2 Phosphorus/Phosphoricic Acis H3PO4 Chlorine/ Hydrochloric Acid HCl (Note no oxygen) However Chlorine/Hypochlorus acid HClO
How much water is in sulfuric acid?
In concentrated sulfuric acid usually about 1%
How you make battery acid?
"Battery Acid" nearly always refers to Sulfuric Acid.Most sulfuric acid is made either by way of the Contact Process or (in much smaller quantities) the Wet Sulfuric Acid process.In the Contact Process sulfur is first burned burned to produce sulfur dioxide. The sulfur dioxide is then oxidized to sulfur trioxide using oxygen in the presence of a vanadium(V) oxide catalyst. The sulfur trioxide is absorbed into 97-98% sulfuric acid to form oleum (also known as fuming sulfuric acid). The oleum is then diluted with water to form concentrated sulfuric acid. Dissolving the sulfur trioxide into sulfuric acid and then diluting to GET sulfuric acid sounds strange but directly dissolving the sulfur trioxide into liquid water is so exothermic that it creates boils the water and creates an extremely corrosive aerosol that is difficult to collect rather than a liquid.In the Wet Sulfuric Acid process, sulfur contained in a fuel or hydrogen sulfide contained in the fuel is burned with the fuel creating sulfur dioxide gas. As with the Contact Process, the sulfur dioxide is reacted with oxygen over vanadium(V) oxide catalyst to produce sulfur trioxide. The next couple of steps differ from the contact process. The sulfur trioxide is hydrated with water in the gas phase to form sulfuric acid gas. This gas is then condensed to form highly concentrated sulfuric acid. One of the benefits of this is that clearing the sulfur from the exhaust gases of the burning fuel reduces air pollution while simultaneously producing a product that can be sold to offset the cost of the air pollution control measures.
How many hydrogen atoms are in a particle of sulfuric acid?
Sulfuric acid is H2SO4. That's 2 hydrogens, 1 sulfur, and 4 oxygens, for a total of 7 atoms. 3 molecules of sulfuric acid would simply have three times of each - 6, 3, and 12 respectively.Unless you mean how many atoms of each are there in 3 moles of sulfuric acid. That's a much different question.
What problems occur when theres to much sulfur dioxide in the air?
The main problem with sulfur dioxide in atmosphere is the influence for acid rain. Sulfur dioxide molecules can react with rainwater to form sulfuric acid. Additionally, as sulfur dioxide is irritant to breathe, it may cause respiratory hazards too.
How much sulfuric acid does a car produce?
if u gathered all the sulfuric acid a car produces in a week, you could fill up 3 gallons..... Note to self: take the bus
Is sulfur dioxide a mixture or compound?
It depends a little on your definition. Concentrated Sulfuric Acid can be produced up to 98% or 98.3% pure H2SO4. So, while H2SO4 would be considered a compound, it is never pure, and is always found in a mixture. Most Sulfuric Acid used in the lab is a much more dilute mixture of Sulfuric Acid and Water. Fuming Sulfuric Acid is a mixture between Sulfuric Acid, H2SO4 and sulfur trioxide SO3.
What is the difference between carbonic acid and sulfuric acid?
Sulfate is a combination of oxygen and sulfur whereas sulfide is the negative ion of sulfur alone. Both are negative ions, anions.Both sulfur and oxygen are "hungry" for electrons. When they make a chemical bond it is to gain a share of electrons to put them into a more stable electron mode (or configuration). They each have six electrons in their outer energy level and they can also share electrons with each other. The sulfate ion that results is SO42- it allows both sulfur and oxygen to share enough electrons to have a stable electron configuration.Sulfur can also just gain two electrons to achieve a stable outer electron configuration, S2-. Compounds like H2S (rotten egg gas), hydrogen sulfide is a compound using sulfide.Na2SO4 , sodium sulfate or H2SO4 (sulfuric acid) are compounds using sulfate.P.S. the suffix '-ate' in chemistry indicates that there is oxygen present whereas '-ide' tells us that only the element alone is present in forming the ion.
How much does a ton of sulfuric acid weigh in lbs?
A ton of sulfuric acid weighs 4,000 pounds.
How much Sulfuric Acid is in Venus's?
The atmosphere of Venus has a high concentration of sulfuric acid vapor at and near the surface, but as you rise into the atmosphere, it's concentration drops sharply. The bulk of the cloud layers surrounding Venus are carbon dioxide.
How much sulphur can you ingest before it becomes toxic?
Sulfur is a common chemical element found in living cells and even proteins. It is not in itself toxic, but can become dangerous when made into sulfuric compound and then added to water to create sulfuric acid. Since it is a mineral, you should never consume pure sulfur.
How much does a gallon of 93 Sulfuric acid weight?
A gallon of 93% sulfuric acid weighs approximately 15.6 pounds.
