Chlorine, pH, Alkalinity weekly in swimming season Calcium, stabilizer, salt (if you have a Chlorine generator) metals monthly
The filter should be set to the "circulate" or "backwash" position when adding chemicals to the pool. This will help distribute the chemicals evenly throughout the pool water. Make sure to follow the specific instructions provided on the chemical packaging for best results.
You will need to add an amount of chemicals that is proportional to the size of your pool. The containers of the chemicals should tell you how much to add for the size of pool you have. It might be better if you take a sample of water to a local pool supply store, so that they can tell you exactly what you need for your specific pool. http://www.ehow.com/about_5390392_chemicals-put-new-pool.html
To raise the pH of your pool you add soda ash (sodium carbonate). To lower the pH of your pool add muriatic acid (hydrochloric acid) or sodium bisulfate. You should always add chemicals with the pump running and check your levels again once the newly added chemicals have been circulated around the pool.
It is best to skim and vacuum your pool first, as this will remove any debris or dirt that has accumulated in the water. Once the pool is clean, you can then add the necessary chemicals. Skimming and vacuuming first ensures that the chemicals are distributed evenly and more effectively in the clean water.
When adding chemicals to a pool, it is important to ensure that the pool's water is within the recommended pH and chlorine levels. The pH level should typically be between 7.2 and 7.6, and the chlorine level should be between 1-3 parts per million (ppm) for a standard swimming pool. Follow the manufacturer's guidelines and test the water regularly to maintain the correct chemical balance.
Scoop out the poo and the check the pool chemicals to be sure they are where they should be for sanitation.
You shouold not use household products to replace pool chemicals. There are many unique properties of pool chemicals that you should be aware of
Check the chemicals with a pool test kit sold at most stores like Walmart or Kmart or a pool store. It shows how to check for PH balance and Chlorine. You must keep your chemicals balanced or the water will get cloudy or worse, green.
You should wipe were the kid vomited and clan the pool with pool chemicals but if it is really bad you should drain the pool cleean it the fill it back up.
never. If you have a problem with the water in your pool, there are many chemicals avalible to help you. go to your local pool store with a water sample and ask for help. they can test your water and tell you exactly what you need to do.
Swimming pool chemicals should be locked away in a storage bin or shed where children cannot gain access to them. Be sure to prevent any dangerous accidents by keeping the children away from the chemicals.
Add chemicals in manually and give it a good stir every so often.
The pool is cloudy, but the chemicals are fine.
You can visit CC Pools and Spas in Atlanta Georgia for replacement pool chemicals. You can also check out your local walmart or home depot.
Crystal Clear with perfectly balanced chemicals.
You can add chlorine and that should keep the pool very clean.
Sustain pool chemicals can be bought from A1Poolfun.