The concentration of the diluted solution will be 15(300/1000) = 4.5 %, if the percent is expressed on a weight/volume basis.
1000mL is equal to 1 liter or 1 kilogram of water.
To prepare 100 mL of 3M hydrochloric acid, you would need to use the formula C1V1 = C2V2, where C1 is the initial concentration (molarity) and V1 is the initial volume, and C2 is the final concentration and V2 is the final volume. In this case, C1 = 3M, V1 = unknown, C2 = 3M, and V2 = 100 mL. By rearranging the formula, you can calculate the volume of the stock solution needed to make the desired concentration.
To find the molarity of the solution, you first need to calculate the mass of ethylene glycol in the solution. Then convert it to moles using the molar mass of ethylene glycol. Finally, calculate the molarity by dividing the moles of ethylene glycol by the volume of the solution in liters.
1.5 L because it is .5 Liters more (1000 mL = 1 L).
There wasn't enough room to write everthing I wanted to say, but I tried it on my own and this is what I was able to come up with: [C] = .3646 mg/ml HCl HCl = 36.46 grams per mole *convert to g/L* .3646mg/1ml X 1g/1000mg X 1000ml/1L = .0003646g/L *convert g/L to Moles/L* [C] = .0003646g/1L X 36.46g/ 1M = .0001 M/L Am I correct?
The HCPCS code for 0.9% sodium chloride irrigation solution 1000ml is J7050.
50ml Way to find: 5/100 * 1000ml
28
170
The answer would depend in part on the densities of the solvent and the solute.
Yes, 10ml is 1% of 1000ml. To calculate this, you divide 10ml by 1000ml and then multiply by 100 to get the percentage. So, (10/1000) x 100 = 1%.
2400 mg is what percent of 1000 ml"?
20% salt solution is the equivalent of adding 200gr salt in a 800 ml (1000ml -200ml) of water. you now have one liter of a 20% solution.
520 ml of HCl in 480 ml of water=1000ml = 5 N
1000mL equates to 100cL
1000mL is equal to 1 liter or 1 kilogram of water.
To prepare 100 mL of 3M hydrochloric acid, you would need to use the formula C1V1 = C2V2, where C1 is the initial concentration (molarity) and V1 is the initial volume, and C2 is the final concentration and V2 is the final volume. In this case, C1 = 3M, V1 = unknown, C2 = 3M, and V2 = 100 mL. By rearranging the formula, you can calculate the volume of the stock solution needed to make the desired concentration.