0
What else can I help you with?
Why is residue or ash or unburnt carbon left after combustion?
Residue or ash is left behind after combustion because not all the fuel is completely burned during the process. Incomplete combustion can occur due to insufficient oxygen supply, poor fuel-air mixture, or low combustion temperatures. The residue can also contain unburnt carbon, which is a byproduct of incomplete combustion.
Does ash burn easily?
Yes, ash burns easily because it is already a byproduct of combustion and contains flammable materials.
What is the byproduct of coal?
One of the byproducts of burning coal is carbon dioxide, a greenhouse gas that contributes to climate change. Coal combustion can also produce ash, sulfur dioxide, nitrogen oxides, and other pollutants that can have negative environmental and health impacts.
What are the products when wood burns?
When wood burns, it undergoes a combustion reaction and primarily produces carbon dioxide, water vapor, and ash. The ash residue consists of the non-combustible components of wood such as minerals and carbon remnants.
What is produced when a fuel combusts?
When a fuel combusts, it produces carbon dioxide, water vapor, heat, and various combustion byproducts such as smoke, ash, and soot. The specific composition of the combustion products depends on the type of fuel and the combustion conditions.
Why is residue or ash or unburnt carbon left after combustion?
Residue or ash is left behind after combustion because not all the fuel is completely burned during the process. Incomplete combustion can occur due to insufficient oxygen supply, poor fuel-air mixture, or low combustion temperatures. The residue can also contain unburnt carbon, which is a byproduct of incomplete combustion.
Name of the process of turning paper into ash?
The process of turning paper into ash is called combustion. During combustion, the paper is burned at high temperatures resulting in the formation of ash as a byproduct.
Does ash burn easily?
Yes, ash burns easily because it is already a byproduct of combustion and contains flammable materials.
How many percent carbon present in ash in thermal power plant?
In a thermal power plant, the carbon content in ash typically ranges from 1% to 10%, depending on the type of fuel used and the combustion efficiency. Fly ash, a byproduct of combustion, may have lower carbon content, while bottom ash can contain slightly higher levels. The specific percentage can vary widely based on operational conditions and the nature of the coal or biomass burned.
Is cinder acidic or alkali?
Cinder is typically considered to be alkaline. It is a byproduct of combustion processes, often consisting of oxides and ash, which can exhibit basic properties. The pH can vary depending on the specific materials involved in the combustion, but cinders generally lean towards alkaline characteristics.
What is the byproduct of coal?
One of the byproducts of burning coal is carbon dioxide, a greenhouse gas that contributes to climate change. Coal combustion can also produce ash, sulfur dioxide, nitrogen oxides, and other pollutants that can have negative environmental and health impacts.
Does the ash cloud have carbon dioxide it it?
definition of ash : ash is a residual product after any combustion process after a perfect combustion of any fuel we get ash hence it is a product which not have any combustible product in it . that's why i think ash does not contain carbon compound because carbon is highly combustible . in this world everything contain carbon inside it but i think ash is a alone example of non carbon product...may b it contain very few amount of carbon but after again burning it does not have any carbon . i think so.
What are the products when wood burns?
When wood burns, it undergoes a combustion reaction and primarily produces carbon dioxide, water vapor, and ash. The ash residue consists of the non-combustible components of wood such as minerals and carbon remnants.
What is ash handling system?
Ash handling refers to the method of collection, conveying, interim storage and load out of various types of ash residue left over from solid fuel combustion processes. The most common types of ash include bottom ash, bed ash, fly ash and ash clinkers resulting from the combustion of coal, wood and other solid fuels.
What are two new materials that are made when you burn paper?
When you burn paper, two new materials that are formed are ash and smoke. Ash is the residue left behind after the paper burns, while smoke is a mixture of gases, vapors, and particles released during combustion.
What is a result of combustion?
Combustion of metals forms metal oxides. Combustion of hydrocarbons, like methane, forms carbon dioxide and water.
What is produced when a fuel combusts?
When a fuel combusts, it produces carbon dioxide, water vapor, heat, and various combustion byproducts such as smoke, ash, and soot. The specific composition of the combustion products depends on the type of fuel and the combustion conditions.
