pooop
Styrofoam is a better insulator than aluminum because it is less conductive of heat due to its air-filled pockets that slow the transfer of heat. Aluminum is a good conductor of heat, so it allows heat to pass through more easily compared to Styrofoam.
Its electrical conductivity is not known. The thermal conductivity is only 5.65×10^−3 W/(m·K). By way of comparison, silver, the best conductor has a conductivity of 430 W/(m·K) - more than 75 thousand times as great.
Nitrogen is a better insulator of heat than water. This is because nitrogen is a poor conductor of heat due to its low thermal conductivity compared to water. In terms of insulation properties, nitrogen would be more effective in retaining heat or keeping out cold compared to water.
Boron nitride can be a conductor under certain conditions due to the presence of free electrons that can move to conduct electricity. This typically occurs in hexagonal boron nitride, which has a similar structure to graphene, allowing for electron mobility. However, boron nitride is more commonly known for its insulating properties.
Copper would be the best conductor for the wire to make the bulb brighter, as it allows electricity to flow more easily. Plastic is an insulator and would not conduct electricity, while gold is a good conductor like copper but is less commonly used due to its higher cost.
metal is a conductor and rubber is an insulator
Lithium is a metal, and metals in general are good conductors - both of electricity, and of heat.
It's more of a conductor, but not a very good one.
Insulator or conductor depending on the circumstances. Aluminum foil conducts heat, but it cuts off air flow and reduces evaporation of fluids. Aluminum foil reflects and thus minimizes radiation transmission. With foods it is more useful as an insulator. It also acts as an insulator on windows. But, aluminum is definitely a good heat conductor.
An insulator. More specifically, a thermal (heat) insulator, as opposed to an electrical insulator, which suppresses the flow of electricity.
Good conductor = low resistance.
Dirt is typically a poor conductor of electricity, making it more of an insulator. Its resistivity can vary depending on its composition and moisture content, but in general, dirt is not a good conductor of electrical current.
Plain distilled (or double distilled) water with no impurities is a poor conductor of electricity. The more impurities it has the better conductor it becomes
Tweezers are typically made of metal, which is a good conductor of electricity. This means that tweezers allow electricity to flow through them easily. However, the insulating properties of the material can vary depending on the specific type of metal or coating used in the tweezers. Overall, tweezers are more likely to be considered conductors rather than insulators.
Lint is not a good conductor of electricity. It is made up of small fibers and pockets of air, which do not allow for the easy flow of electrons. In fact, lint is more likely to act as an insulator, trapping heat and reducing air circulation.
Water is a poor conductor of electricity due to the low concentration of ions present in it. However, impurities or dissolved minerals in water can increase its conductivity to some extent. Generally, water is considered more as an insulator than a conductor compared to metals or salts.
Argon is an insulator and it is also becoming more popular as in insulator used in windows!