0
What else can I help you with?
How do you separate salt and oil?
HOW TO SEPARATE SALT FROM OIL .First of all to separate salt from oil you need to pour some water, salt, and oil into a beaker in that order. .After you have put those materials in the beaker, you should see the salt dissolving, then you should be left with oil and water. .Next to separate the oil from the water you could either, leave the solution for a while and the oil eventually should rise to the top and float above the water, or you could use a funnel with a stopcock at the bottom which will allow you to drain the water out underneath the oil. GOOD LUCK! :)
What would happen if you tossed a beaker full of phospholipids into a beaker of oil?
The phospholipids would align themselves at the interface between the oil and water layers due to their amphipathic nature. This arrangement forms a lipid bilayer with hydrophobic tails in the oil and hydrophilic heads in contact with water. This process mimics the formation of cell membranes in living organisms.
Can oil and water make a solution?
no!
Is oil and water a suspension?
No, oil would not be soluble to create the solution without some type of emulsifier.
How do you make water soluble mineral oil?
Water-soluble mineral oil can be made by emulsifying mineral oil with a suitable emulsifier in water. The emulsifier helps to disperse the oil in water and stabilize the solution. Additionally, using a high-shear mixer can help in achieving a stable water-in-oil emulsion.
How do you mix oil and water?
pouring it into a beaker and permanently stirring it
Can a seed put in a beaker of water with a layer of oil germinate?
no
What will happen if a membrane sac filled with large molecules of oil is suspended in a beaker of water?
If a membrane-bound sac filled with large molecules of oil is suspended in a beaker of water, water will start to enter the sac. The sac will then swell.
What should be added to a beaker half filled with water to raise it's water level?
stones :)
Why is oil added to the water in the beaker?
Oil is added to water in a beaker to create a separation between the two liquids, as oil is less dense and immiscible with water. This demonstrates the principle of liquid-liquid separation and can be used in experiments to observe properties like density and solubility. Additionally, adding oil can help visualize interactions between different substances, such as emulsification or the behavior of hydrophobic materials.
How do you separate salt and oil?
HOW TO SEPARATE SALT FROM OIL .First of all to separate salt from oil you need to pour some water, salt, and oil into a beaker in that order. .After you have put those materials in the beaker, you should see the salt dissolving, then you should be left with oil and water. .Next to separate the oil from the water you could either, leave the solution for a while and the oil eventually should rise to the top and float above the water, or you could use a funnel with a stopcock at the bottom which will allow you to drain the water out underneath the oil. GOOD LUCK! :)
Can Baby oil and water make a solution?
No, normally it isn't . If you mixed oil and water together and left it, then it would separate out to form different layers. This means that the oil isn't dissolving in the water (or vise versa). that means that it isn't a solution it is a mixture
What would happen if you tossed a beaker full of phospholipids into a beaker of oil?
The phospholipids would align themselves at the interface between the oil and water layers due to their amphipathic nature. This arrangement forms a lipid bilayer with hydrophobic tails in the oil and hydrophilic heads in contact with water. This process mimics the formation of cell membranes in living organisms.
Is oil water a mixture or a solution?
It is neither, it is an element
What is a solution in which water is not the solvent?
Diethyl Ether, Naphtha, Xylene, Toluene, Petroleum Distillates, etc.
Why is the outside surface of beaker of water is colder than the outside surface of oil?
It is because of the different viscosity of the two liquids
Which would make a solution sugar in water oil in water Ice in water sand in water?
The initial choice is the only one that will readily make a solution.
