0
What else can I help you with?
How far should an oxygen cylinder valve be opened for use?
An oxygen cylinder valve should be fully opened for use to ensure proper flow of oxygen. It is important to open the valve slowly and all the way to avoid any potential hazards or issues with the equipment.
How would one go about cleaning the spit valve of a clarinet?
To clean the spit valve of a clarinet, you can gently remove it from the instrument. Use a small brush or pipe cleaner to clean inside the valve and its housing. Wipe down the valve with a clean cloth and allow it to fully dry before reattaching it to the clarinet.
When installing the new liquid propane gas cylinder the pressure relief valve should point?
When installing a new liquid propane gas cylinder, the pressure relief valve should point away from any ignition sources, buildings, or high-traffic areas. It should be positioned in a safe direction where any released gas will not cause harm or damage.
When your sweat evaporates is that a chemical change?
No, the evaporation of sweat is a physical change, not a chemical change. Evaporation simply involves a change in state from liquid to gas, without any change in the chemical composition of the substance.
Is the liquid propane in a barbecue evaporates away because the user left the valve open a chemical or physical change?
It's a physical change. Chemically, it's still propane - but it's physically changed from a liquid to a gas.
Where can one purchase a commercial Honeywell gas valve?
You can purchase a Honeywell gas valve from any good plumbers merchant on the high street. You can also go online to websites like ScrewFix or Amazon where they sell these.
What is a contemporary phenomenon?
Contemporary phenomenon refers to any events during present time that can be seen and studied. Social media sites are an example of contemporary phenomenon.
What tv commercial is non sequitur?
Any axe commercial
Why is my tire valve not taking in any air?
There could be several reasons why your tire valve is not taking in air. It could be due to a damaged valve stem, a clogged valve core, or a leak in the valve itself. It is recommended to inspect the valve and surrounding area for any visible damage or debris, and if necessary, replace the valve or seek professional help to diagnose and fix the issue.
Factors affecting the rate of adsorption?
The adsorbtion of methyl blue by activated carbon increases with increasing temperature. Not sure about other types of adsorbtion. Source: Gürses, A., Doğar, C., Açıkyıldız, M., Özkan, E. and Bayrak, R. 2005. EFFECT OF TEMPERATURE FOR THE ADSORPTION OF METHYLENE BLUE ONTO ACTIVATED CARBON PRODUCED FROM WASTE DOGROSE SEEDS . Acta Hort. (ISHS) 690:277-284 http://www.actahort.org/books/690/690_42.htm
Whats the commercial value of Penguins?
penguins do not have any commercial value.
Is my water heater TP valve leaking?
To determine if your water heater's TP valve is leaking, check for any water dripping or pooling around the valve. If you notice any signs of leakage, it may indicate a problem with the valve that needs to be addressed.
Is my water heater overflow valve leaking?
To determine if your water heater overflow valve is leaking, check for any water dripping or pooling around the valve. If you notice any signs of leakage, it may indicate a problem with the valve that needs to be addressed.
Is the toilet water supply valve leaking?
To determine if the toilet water supply valve is leaking, check for any visible signs of water around the valve or listen for any hissing or dripping sounds.
What is the fill valve?
Any valve used to fill a vessel or tank or replenish a trap seal
Does pressure effect on adsorption of oxygen?
Yes. Pressue effects both adsorption and absorption of oxygen. I assume you really did mean adsorption (and not absorption) but just in case, this answer addresses both - since the answer is similar. As pressure increases, the fugacity of oxygen in the liquid or vapor phase will also increase. In order to stay in equilibrium, you would expect the concentration of oxygen on a surface (adsorption) to increase as well. There is one caveat in that if the oxygen is in a mixture, the fugacity of the other components of the mixture will also be increasing and may be in competition with the oxygen for adsorption to the surface. Once the surface is saturated, raising the pressure may not have any effect on the adsorption. Likewise, dropping the pressure will decrease the fugacity of oxygen in the fluid phase and promote desorption from a surface (the reverse of adsorption). Similarly, increasing or decreasing pressure will increase and decrease the fugacity of oxygen in the vapor phase and require more or less oxygen to be absorbed into a liquid (or in some cases solids - although most solids don't dissolve gasses very well). Increaing pressure can also change the distribution of oxygen between two immiscible liquids as the fugacity of the oxygen in each depends on both pressure and the effect of pressure on the fugacity of the solvent liquids.
What is moving that causes lightning?
Electrons always in any electrical phenomenon.
