0
What else can I help you with?
What is the specific heat of mixture and how does it affect the overall temperature change in a system?
The specific heat of a mixture is the amount of heat needed to raise the temperature of the mixture by 1 degree Celsius. It affects the overall temperature change in a system because substances with higher specific heat require more heat to raise their temperature, while substances with lower specific heat require less heat. This means that the specific heat of a mixture determines how much heat is needed to change its temperature, impacting the overall temperature change in the system.
What amount of heat needed to increase the temperature of a 1-kilogram substance by 1 and degC is known as the?
The amount of heat needed to increase the temperature of a 1-kilogram substance by 1 degree Celsius is known as the specific heat capacity of the substance. It is a measure of how much heat energy is required to raise the temperature of a given mass of the substance by one degree Celsius.
How much energy is needed to raise the temperature of a silver necklace chain with a mass of 22.5 g from room temperature 25 c to body temperature 37 c?
To calculate the energy needed to raise the temperature of the silver chain, you can use the formula: Q = mcΔT, where Q is the energy, m is the mass, c is the specific heat capacity of silver (0.24 J/g°C), and ΔT is the change in temperature (37°C - 25°C). Plugging in these values, the energy required would be approximately 6.48 Joules.
How much heat is needed to raise the temperature of 6.00 g of copper by 15.0 and degC?
The specific heat capacity of copper is 0.385 J/g°C. Using the formula Q = mcΔT, where Q is the heat, m is the mass, c is the specific heat capacity, and ΔT is the temperature change, you can calculate that 34.65 J of heat is needed to raise the temperature of 6.00 g of copper by 15.0°C.
What do you use to heat substances to a constant temperature?
A thermostat is typically used to heat substances to a constant temperature in laboratory settings. It helps regulate and maintain the desired temperature by turning the heating element on or off as needed.
Why is the core solid if it is the hottest layer of earth?
The inner core is under enormous pressure, which raises the temperature needed to melt it above its actual temperature.
What kind of wrench is needed to loosen the oil filter in a Mercedes Benz ml?
What kind of wrench is needed to loosen the oil filter in a Mercedes Benz ml?"
What is the difference between loctite 635 and loctite 609?
Loctite 609 has a lower viscosity of 125 cPs compared to the 2000 cPs of 635. As a result, the 635 will work with a gap of .010" where 609 is recommended only to a gap of .005". 635 has a shear strength of 4500 psi where the shear strength of 609 is only 2300 psi. 635 has a cure rate of 1 hour to fixture vs. the 10 minutes needed for 609. Both meet the Mil Spec MIL-R-46082B Hope this helps, Kevin
What size wrench is needed to loosen the front caliper on your 2005 ford expedition?
Loosen and remove the caliper retaining bolts. Torx T-40 or T-45
What information is needed to calculate the amount of energy needed to heat of volume of water to some temperature?
You need the amount of water, the temperature of the water, and the desired temperature.
How can I loosen the brakes on a bike?
To loosen the brakes on a bike, locate the brake adjustment barrel near the brake lever. Turn the barrel counterclockwise to loosen the brakes. Test the brakes to ensure they are not too loose or too tight. Adjust as needed for optimal performance.
Why is the temperature needed to freeze ocean water lower than the temperature needed to freeze the surface of a fresh lake?
The ocean is larger than a lake. Therefore, being larger it can absorb more heat. That is why a lower temperature is needed to freeze it.
What environment is needed to ensure that a supercomputer can work properly?
A cool temperature is needed.
Why is the temperature needed to freeze ocean water lower than the temperature needed to freeze a surface of a fresh water lake?
The ocean is larger than a lake. Therefore, being larger it can absorb more heat. That is why a lower temperature is needed to freeze it.
How can I safely loosen the brakes on my bike?
To safely loosen the brakes on your bike, first locate the brake adjustment barrel near the brake lever. Turn the barrel counterclockwise to loosen the brakes. Test the brakes to ensure they are not too loose or too tight. Adjust as needed for optimal performance.
What temperature is needed to make a snowflake?
monkey
What equipment is needed to set the timing for a 1983 305?
A timing light and a 9/16" swivel socket to loosen the distributor.
