A thin piece of wood that covers a roof is called a shingle.
astragal
being lit, with the flame blown out, leaving an ember at the tip. Upon exposure to high concentrations of oxygen, the glowing ember flares and gives a flame.
· Absorption of water into a towel · Crumpling a piece of paper · Pulling copper into a thin wire - a change of shape, but not a change of composition · Cutting a material such as wood · Tearing a piece of tin foil
Typically a match or wooden splint (a thin piece of wood) is used to manually ignite a Bunsen burner when the gas is flowing through it.
PANEL
The thin piece of wood used to cover a roof is called ply board or deck board. Plyboard is a sheet material manufactured from thin layers or plies of wood veneer that are glued together.
The thin piece of wood used to cover a roof is called ply board or deck board. Plyboard is a sheet material manufactured from thin layers or plies of wood veneer that are glued together.
A thin piece of wood?
I'm doing a word latter for school that doesn't help me at all
It is a thin oblong piece of material, such as wood or slate, that is laid in overlapping rows to cover the roof or sides of a house or other building.
it is lath
astragal
Plank Thin, lightweight wood is balsa.
being lit, with the flame blown out, leaving an ember at the tip. Upon exposure to high concentrations of oxygen, the glowing ember flares and gives a flame.
A 12/12 is 45 degrees. If you set a 45 degree piece of wood on the roof it should be level.
Conestoga wagons had a roof made with canvas. The canvas was supported with a wooden frame and suspension and both were made with wood. The covers were arched and were usually white.
A thin sheet of bronze was often overlaid onto a deeply dished piece of wood.