0
What else can I help you with?
How much ml 10 percent lime milk do you add in sulfuric acid to get pH 4?
The amount of 10% lime milk needed to adjust the pH of sulfuric acid to 4 will depend on the initial volume and concentration of the sulfuric acid. A titration experiment will need to be conducted to determine the exact volume of lime milk required to reach a pH of 4. The titration process involves slowly adding lime milk to the sulfuric acid solution while monitoring the pH until the desired pH of 4 is achieved.
What would have happened if sulfuric acid was not add in spectrophotometric titration?
If sulfuric acid were not added in a spectrophotometric titration, the pH of the solution would not be acidic enough to ensure the proper ionization of the analyte. This could result in inaccurate readings or the formation of unwanted precipitates that could interfere with the analysis. Sulfuric acid also helps to stabilize the color of the indicator used in the titration.
What product is formed when you add zinc to sulfuric acid?
If you add zinc to sulfuric acid, you will get hydrogen gas as a product.
The safest way to dilute concentrated sulfuric acid is to add -?
The safest way to dilute concentrated sulfuric acid is to add the acid to water slowly while stirring constantly. Never add water to concentrated sulfuric acid as it can cause a violent reaction and splattering. Always wear appropriate protective equipment such as gloves and goggles when handling concentrated sulfuric acid.
How do you prepare 7M sulfuric acid from concentrated sulfuric acid?
To prepare 7M sulfuric acid from concentrated sulfuric acid, first calculate the volume of concentrated sulfuric acid needed to make 7M solution. Then, measure the calculated volume of concentrated sulfuric acid and carefully dilute it with water to the desired volume while stirring continuously. Make sure to add acid to water slowly to prevent splashing or generation of heat.
How much ml 10 percent lime milk do you add in sulfuric acid to get pH 4?
The amount of 10% lime milk needed to adjust the pH of sulfuric acid to 4 will depend on the initial volume and concentration of the sulfuric acid. A titration experiment will need to be conducted to determine the exact volume of lime milk required to reach a pH of 4. The titration process involves slowly adding lime milk to the sulfuric acid solution while monitoring the pH until the desired pH of 4 is achieved.
What would have happened if sulfuric acid was not add in spectrophotometric titration?
If sulfuric acid were not added in a spectrophotometric titration, the pH of the solution would not be acidic enough to ensure the proper ionization of the analyte. This could result in inaccurate readings or the formation of unwanted precipitates that could interfere with the analysis. Sulfuric acid also helps to stabilize the color of the indicator used in the titration.
What product is formed when you add zinc to sulfuric acid?
If you add zinc to sulfuric acid, you will get hydrogen gas as a product.
The safest way to dilute concentrated sulfuric acid is to add -?
The safest way to dilute concentrated sulfuric acid is to add the acid to water slowly while stirring constantly. Never add water to concentrated sulfuric acid as it can cause a violent reaction and splattering. Always wear appropriate protective equipment such as gloves and goggles when handling concentrated sulfuric acid.
Can a car take any kind of battery acid?
It is unusual to add battery acid to a car. Cars (not hybrids) normally use lead acid batteries and the acid is sulfuric acid, however you don't add sulfuric acid. When the fluid in a cell is low you add distilled water. Only the water has evaporated, the acid has not.
What happens when you add sulfuric acid to plants?
It will die , dump
How do you prepare 7M sulfuric acid from concentrated sulfuric acid?
To prepare 7M sulfuric acid from concentrated sulfuric acid, first calculate the volume of concentrated sulfuric acid needed to make 7M solution. Then, measure the calculated volume of concentrated sulfuric acid and carefully dilute it with water to the desired volume while stirring continuously. Make sure to add acid to water slowly to prevent splashing or generation of heat.
How do you dilute sulfuric acid safely?
To dilute sulfuric acid safely, always add the acid to water slowly while stirring constantly. Never add water to the acid as this can cause splattering. Use appropriate protective gear such as gloves, goggles, and a lab coat when handling sulfuric acid.
What happens when you add sulfuric acid to water?
When sulfuric acid is added to water, it dissociates into hydrogen ions and sulfate ions. This process releases heat, so it is important to add the acid to water slowly and with stirring to prevent splashing or overheating. Additionally, diluting sulfuric acid with water helps to reduce the acidity and make it safer to handle.
How do you make 1 Molar sulfuric acid?
To make 1 molar (1M) sulfuric acid, you will need to dissolve 98.08 grams of sulfuric acid (H2SO4) in enough water to make 1 liter of solution. Measure out the appropriate amount of sulfuric acid using a balance and dissolve it in a volumetric flask with the necessary amount of water to reach a final volume of 1 liter. Remember to always add acid to water and not the other way around to avoid splattering and potential hazards.
What is for 2N sulfuric acid?
2N is 2 normal; add 56,11 mL sulfuric acid 98 % to 250 mL deionized water. Mix and add water up to 1 000 mL.
What happens when you add universal indicator to sulfuric acid?
It turns the universal indicator to scale 1
