Convection.
The scientific process of water being heated up is called thermal expansion. As water is heated, its molecules gain energy, move faster, and spread out, causing the water to expand in volume.
Cause of the presence of carbondioxide
Ethanol is heated in a water bath to provide a more uniform and controlled heating process, reducing the risk of overheating or boiling over. This method helps regulate the temperature and prevents direct contact of the ethanol with a high heat source, thus minimizing the risk of fire or explosion.
Air bubbles form when water is heated because the solubility of gases, like oxygen, decreases as the water temperature rises. As the water heats up, it releases dissolved air in the form of bubbles. Additionally, the bubbles can also come from impurities in the water or gases produced by chemical reactions occurring during heating.
Boiling point of water is an intensive property because it does not depend on the amount of the substance present. Water will always boil at 100 degrees Celsius at standard atmospheric pressure regardless of how much water is being heated.
convection. As the water near the heating element is heated, it becomes less dense and rises, creating a current that circulates the water throughout the aquarium, evenly distributing the heat.
water loses it's most heat because the stored in the water gets out in steam.
because the steam that the water makes when it is being heated needs to go some where, if it deos not expand then it will explode.
Water being heated, and turning to steam.
the air being heated from a fireplace,air from a furnace,boiling water,the air being heated in a hot air balloon.
yes
The scientific process of water being heated up is called thermal expansion. As water is heated, its molecules gain energy, move faster, and spread out, causing the water to expand in volume.
No, substances do not have to contain water to be heated in the microwave. The microwave oven uses electromagnetic waves to agitate the molecules in the substance being heated, causing them to generate heat regardless of their water content.
I assume it is "what does the conversion of water mean?" Water can be converted to ice by being frozen. Or to steam to drive a steam engine by being super heated. Or changed to water vapour by being heated until the water is evaporated away (as in desalination of sea water) and the water vapour to be condensed back into drinkable water free of salt.
Nuclear reactor heats water making steamTurbines are turned by steamCooling tower condenses spent steam back to waterwater is returned to the nuclear reactorIts actually a bit more complicated than this single closed loop, because the water heated by the nuclear reactor itself becomes slightly radioactive. Because of this radioactivity, for safety reasons a system with two closed loops connected by a heat exchanger is used. In the primary loop the water just keeps circulating between the nuclear reactor and the heat exchanger. In the secondary loop the water circulates as in the steps listed above, but substitute Heat exchanger for Nuclear reactor.
Land and sea are heated by absorbing radiant energy from the sun. Air is heated indirectly by being in contact (conduction) with land or water.
Water changes from one state to another by being heated or cooled