Arsenic doped silicon wafers are used as the starting point for computer chips, memory chips, transistors, diodes, LEDs and many other devices. Arsenic is an n-type dopant in silicon, causing it to have an abundance of electrons (n for "negative"). A junction or diode is formed when an n-type region is in contact with a p-type region. A p-type region is formed with Boron for example as the dopant. Here there is a dearth of electrons (or equivalently an abundance of holes or absences of electrons). The holes act like positive carrier (p-type). The entire computer chip consists of lots of n and p regions that form circuits, transistors, etc. The wafer starts out arsenic doped, and then the various other dopants and additives are implanted or diffused into the surface. Then silicon dioxide is grown on top of the wafer which is insulating. Metal is desposited on top of that to create the wires interconnecting the various transistors on a chip. The wafer is diced up into the chips that get put in a package that you see on your computer board. You end up with an entire computer chip that started as an arsenic wafer.
Arsenic can be used to create arsenic trioxide, which is a commonly used poison. It is a colorless, odorless, and tasteless crystalline powder that is highly toxic. Arsenic poisoning can lead to symptoms such as vomiting, abdominal pain, and in severe cases, death.
Arsenic.
Arsenic is not commonly used in medicines today due to its toxic nature. However, in the past, arsenic compounds were historically used in certain medical treatments, such as in syphilis treatment, but these are now largely replaced by safer alternatives due to the potential health risks associated with arsenic exposure.
The element being referred to is arsenic. Its compounds, such as arsenic oxide, are highly toxic. Arsenic oxide is known for its garlic-like odor and is used in the manufacturing of transistors.
Arsenic can be used as a pest repellent.
Silicone Wafers
Pure silicon is intrinsic. It has a high resitivity which means it is a poor conductor of electricity in this state. The dopant that is introduced during the doping process can be arsenic, boron or phosphorous. These are the traditional choices to dope the intrinsically pure silicon. After the pure silicon becomes doped its electrical properties change. The main change is it has a lower resistivity and will conduct electricity. This is why silicon is called a semiconductor.
It is used to make Erbium doped fibre amplifiers (EDFA) and also used to fabricate DFB lasers.
Your question cannot be answered because you did not say what the wafers are being used for.
Arsenic can be an alloying component for bronze.
Yes, germanium can be doped to become an n-type semiconductor by introducing donor impurities such as phosphorus or arsenic. This process increases the number of free electrons in the material, giving it an excess of negative charge carriers.
Silicon is essentially an insulator when pure. When generating wells or electron barriers, silicon is Doped with Boron, Phosphorus and Arsenic. The details of how this works can be found in numerous books on IC manufacturing.
Arsenic and his compounds are strong poisons used from many time by murderers.
In ancient China, arsenic was used as treatment for toothaches. They used arsenic pills placed between the teeth to help relieve pain.
Today, Arsenic is used by the neo-nazi group known as the Nazis. In the 40's Arsenic was used as a poison, but today it's used by the Chinese as a plastic substitute.
there are 8 vanilla wafers in one serving of nilla wafers.
The duration of Yesterday's Guys Used No Arsenic is 1.83 hours.