oils
acid
Most plastics come from hydrocarbon monomers - hydrogen and carbon. Occasionally another element, such as Fluorine, is added to make a different plastic. These monomer molecules are forced to join under heat and pressure (sometimes with a catalyst) to form a polymer. Another group use Silicon rather than carbon. These form the silicone plastics.
Amber is a hydrocarbon, and will burn.
It is used in lacquers, plastics, and also artificial leathers. Pyroxylin plastics are made by colloiding pyroxylin with a plasticizer,
Hydrocarbon is a carbon dioxide but is also call hydrocarbon
boo
hydrocarbon
Though petrochemicals are a critically important source of materials for plastics (and for many, many other products and industrial feedstocks), most oil and hydrocarbon resources (coal, gas, etc.) are used as fuels. It's that simple.
Yes, an interior alkyd primer can be used to prime decoys.
Traditionally, alkyds are found in solvent-based paints that must be reduced with paint thinner or mineral spirits. "Waterborne alkyd" is a generic term to refer to an alkyd resin that can be used in a water-thinnable paint. Because alkyds are not miscible with water, a chemical modification is sometimes used to produce a hybrid alkyd resin - often acrylic/alkyd or urethane/alkyd - that is compatible with water. These hybrids are often categorized generically under the term waterborne alkyds. A pure alkyd can be emulsified in water using appropriate surfactant combinations. This type of surfactant-stabilized alkyd emulsion has been sometimes referred to as an "alkyd latex." Different resin manufacturers use varying terminology to describe waterborne alkyds with the terms alkyd emulsion, alkyd dispersion, and alkyd latex being among the most common.
It is a fast drying alkyd which is made by reacting the fatty acid, conjugated double bonds, in a Diels-Alder type reaction, with liquid styrene monomer. It sets up very quickly to become handleable, then dries a normal alkyd. They have good adhesion to aluminum and acrylic plastics. They are used to make hammered finishes , because they are usually in Xylene. There is a sister resins made by adding vinyl toluene, which are in an aliphatic solvent. They both have a specific re-coating window of under 4 hrs .
All plastics are a group of hydrocarbon molecules . Acrylic cement is a glue that melts the surface of the plastic fusing it all together with the other plastic material
Primer made with alkyd base.
paint jobs
Alkyd is used to create paints that will dry extremely hard and will resist multiple cleanings. Normally, alkyd paints are oil-based, but there are now water based varieties. You can find alkyd paints on doors and trim both inside and outside houses.
Crude Oil, Ethanol ( Alcohol ), Fossil Fuels.
BC type Dry powder extinguisher is the hydrocarbon extinguisher since it is used for extinguishing hydrocarbon fires.