answersLogoWhite

0

When you rub a copper rod with a cloth, electrons are transferred between the two materials due to friction. This can cause a buildup of static electricity on the rod, giving it a slight negative charge.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

How to clean copper pans effectively?

To clean copper pans effectively, mix equal parts vinegar and salt to create a paste. Rub the paste onto the pan, let it sit for a few minutes, then scrub with a sponge or cloth. Rinse with water and dry thoroughly. Alternatively, use a commercial copper cleaner following the manufacturer's instructions.


What happened when you rub an acetate rod with a dump wool?

When you rub an acetate rod with a damp wool, it causes the transfer of electrons from the wool to the acetate rod. This creates an imbalance of charge between the two materials, resulting in the acetate rod becoming negatively charged and the wool becoming positively charged. This process is known as triboelectric charging.


What do you mix to take grime off of a copper penny?

You can create a mixture of vinegar and salt to help remove grime from a copper penny. Simply soak the penny in the mixture for a few minutes, then gently rub it with a soft cloth or brush to help lift off the grime. Rinse with water and dry thoroughly.


What is the streak color of copper?

The streak color of copper is reddish-brown. When you rub a copper sample against a streak plate, it leaves behind a reddish-brown mark.


What should used to clean copper pennies?

A mixture of vinegar and salt can be used to clean copper pennies. Simply soak the coins in the solution for a few minutes, then gently rub them with a soft cloth to remove any remaining dirt or grime. Avoid using abrasive materials or harsh chemicals as they can damage the coins.

Related Questions

What happens when rub an ebonite with a wool cloth?

The ebonite rod will gather a static electric charge, as electrons are transferred.


What happens when you rub vinyl with wool cloth?

You build a charge when rubbing vinyl with a wool cloth. The wool cloth is very weak in holding electrons so when you rub it with the ebonite rod the electrons transfer onto the rod. The rod is negatively charged (assuming that the rod was neutrally charged). The wool becomes positively charged (assuming that the wool was neutrally charged)


if you rub a plastic rod with a dry cloth what charge is left on the cloth?

The cloth will acquire a negative charge. Rubbing the plastic rod transfers electrons from the rod to the cloth, leaving the cloth with an excess of electrons, giving it a negative charge.


What happens when you rub a piece of cloth with a polythene rod?

Rubbing a piece of cloth with a polythene rod transfers electrons from one material to the other due to friction. This causes the cloth to become negatively charged and the polythene rod to become positively charged, leading to the attraction between them due to opposite charges.


What happens when iron rod rubbed with wool cloth?

The iron rod becomes shinier and the wool cloth wears out. If you rub the same wool cloth on a hard rubber rod, the rod will become charged with static electricity and you will be able to pick up small bits of paper with it---whoopee!


If you rub a copper rod rather than a polythene rod the copper rod will not stay charged why not?

Copper is a good conductor of electricity, so when it is rubbed, any charge accumulated on its surface quickly redistributes throughout the rod and dissipates. This rapid conduction of charge prevents the copper rod from retaining a net charge like a polythene rod, which is an insulator and can hold onto excess charge more effectively.


When you rub a ruler with a cloth what happens to the cloth?

Rubbing a ruler with a cloth creates friction, which transfers some of the ruler's electrons to the cloth, giving the cloth a negative charge. This process is called triboelectrification.


What is best to get rust of a gun?

Wet the rusty area with a light penetrating oil, let soak several hours. Rub with clean, coarse cloth, changing to a clean cloth as needed. Avoid steel wool, as it will remove finish. For heavy rust, visit the grocer for a COPPER Chore-boy pot scrubber. Wet the area with oil, let soak, rub gently with the COPPER scrubber (do not use steel pot scrubber). Gun may take on copper color. Wet again with oil, rub with clean cloth, copper color comes off.


What happens when you rub ebonite with a wood cloth?

electrons are transferred to the stick,causing it to take on a negative charge.


What happens when you rub ebonite stik with a wood cloth?

electrons are transferred to the stick,causing it to take on a negative charge.


Will rubbing a glass rod with a wool cloth create static electricity?

Yes, rubbing a glass rod with a wool cloth can create static electricity by transferring electrons between the two materials. This process causes the glass to become positively charged and the wool to become negatively charged, resulting in static electricity buildup.


What happens if you rub a glass rod with a piece of silk and the rod becomes positively charged?

When you rub a glass rod with silk, electrons are transferred from the glass rod to the silk, leaving the rod with a net positive charge. This positive charge creates an electric field around the rod, which can attract negatively charged objects or repel positively charged objects due to the principles of electrostatics.