0
What else can I help you with?
What is the normality of concentrated sulfuric acid?
Concentrated sulfuric acid typically has a normality of around 18-19 N (normal). This high normality is due to the high concentration of sulfuric acid molecules in the solution, which results in a greater number of equivalents per liter compared to dilute solutions.
What is normality of sulfuric acid when molarity is 4m?
The normality of sulfuric acid is 8N when the molarity is 4M because sulfuric acid is a diprotic acid, meaning it can donate two moles of protons per molecule. Since normality is the equivalent concentration of a compound, it is double the molarity for a diprotic acid like sulfuric acid.
Ho to prepare 0.02 N sulfuric acid?
To prepare 0.02 N sulfuric acid, dilute concentrated sulfuric acid with water in a specific ratio. For example, to prepare 100 ml of 0.02 N sulfuric acid, you would mix 0.4 ml of concentrated sulfuric acid (98% purity) with 99.6 ml of water. It's crucial to handle concentrated sulfuric acid with caution due to its corrosive nature.
What is non concentrated sulfuric acid?
Non-concentrated sulfuric acid refers to a diluted form of sulfuric acid where the concentration of sulfuric acid is lower than typical concentrated sulfuric acid solutions which are around 95-98% purity. Non-concentrated sulfuric acid is often prepared by mixing a specific amount of concentrated sulfuric acid with water to achieve the desired concentration for a particular application.
What is the percent sulfuric acid contained in concentrated sulfuric acid?
Concentrated sulfuric acid typically contains around 98% sulfuric acid by weight. This means that for every 100 grams of concentrated sulfuric acid, 98 grams are sulfuric acid and the remaining 2 grams are water.
What is the normality of concentrated sulfuric acid?
Concentrated sulfuric acid typically has a normality of around 18-19 N (normal). This high normality is due to the high concentration of sulfuric acid molecules in the solution, which results in a greater number of equivalents per liter compared to dilute solutions.
What is normality of sulfuric acid when molarity is 4m?
The normality of sulfuric acid is 8N when the molarity is 4M because sulfuric acid is a diprotic acid, meaning it can donate two moles of protons per molecule. Since normality is the equivalent concentration of a compound, it is double the molarity for a diprotic acid like sulfuric acid.
Ho to prepare 0.02 N sulfuric acid?
To prepare 0.02 N sulfuric acid, dilute concentrated sulfuric acid with water in a specific ratio. For example, to prepare 100 ml of 0.02 N sulfuric acid, you would mix 0.4 ml of concentrated sulfuric acid (98% purity) with 99.6 ml of water. It's crucial to handle concentrated sulfuric acid with caution due to its corrosive nature.
Is concentrated sulfuric acid a liquid?
Yes, concentrated sulfuric acid is a liquid.
What is non concentrated sulfuric acid?
Non-concentrated sulfuric acid refers to a diluted form of sulfuric acid where the concentration of sulfuric acid is lower than typical concentrated sulfuric acid solutions which are around 95-98% purity. Non-concentrated sulfuric acid is often prepared by mixing a specific amount of concentrated sulfuric acid with water to achieve the desired concentration for a particular application.
What is the percent sulfuric acid contained in concentrated sulfuric acid?
Concentrated sulfuric acid typically contains around 98% sulfuric acid by weight. This means that for every 100 grams of concentrated sulfuric acid, 98 grams are sulfuric acid and the remaining 2 grams are water.
What is the normality of 98 g of sulfuric acid in 500 mL of solution?
To determine normality, you first need to calculate the number of equivalents in the solution. Sulfuric acid (H2SO4) is a diprotic acid, so it can donate two equivalents of acid per molecule. The molar mass of sulfuric acid is 98 g/mol. Hence, there are 98 grams of sulfuric acid in 500 mL or 0.5 L of solution, which is equivalent to 1 mol/L. Therefore, the normality of the solution is 2 N (since sulfuric acid is diprotic).
How do you prepare 4N sulphurice acid?
To prepare a 4N sulfuric acid solution, begin by calculating the appropriate volume of concentrated sulfuric acid needed. Concentrated sulfuric acid typically has a normality of about 18N; thus, you would dilute it by mixing 1 part concentrated sulfuric acid with approximately 4.5 parts distilled water. Always add the acid to water slowly while stirring to prevent exothermic reactions that can cause splattering. Finally, ensure proper safety measures, including wearing gloves and goggles, are in place during the preparation.
How would you prepare 4N dilute sulfuric acid from concentrated sulfuric acid for use in an experiment?
To prepare 4N dilute sulfuric acid, you would first calculate the volume of concentrated sulfuric acid needed based on its concentration. Then, slowly add the calculated volume of concentrated sulfuric acid to an appropriate volume of water while stirring continuously. Finally, dilute the solution to the desired volume with water and ensure proper mixing to obtain 4N dilute sulfuric acid for use in the experiment.
How do you make concentrated sulfuric acid from dilute sulfuric acid?
Concentrated sulfuric acid can be made from dilute sulfuric acid by removing the water through a process such as distillation or evaporation. This can be achieved by heating the dilute sulfuric acid to bring it to its boiling point and capturing the vapors that are released, leaving behind the more concentrated sulfuric acid.
How do you prepare 7M sulfuric acid from concentrated sulfuric acid?
To prepare 7M sulfuric acid from concentrated sulfuric acid, first calculate the volume of concentrated sulfuric acid needed to make 7M solution. Then, measure the calculated volume of concentrated sulfuric acid and carefully dilute it with water to the desired volume while stirring continuously. Make sure to add acid to water slowly to prevent splashing or generation of heat.
What is the ratio of water and concentrated sulfuric acid in dilute sulfuric acid?
The ratio of water to concentrated sulfuric acid in dilute sulfuric acid is typically 10:1, meaning there is about 10 times more water than concentrated sulfuric acid in the solution. This dilution is necessary to reduce the concentration of sulfuric acid for safety and handling purposes.
