There is not a formula for this, but you can use the formula for pressure. Then it can be put into the formula with temperature that you have.
To convert pressure units from pascals to joules, you can use the formula: 1 Pascal 1 Joule per cubic meter. This means that the pressure in pascals is equivalent to the energy density in joules per cubic meter.
Yes, 1 cubic meter of LPG is equal to approximately 1000 liters of LPG at standard temperature and pressure. However, the exact conversion may vary slightly depending on factors such as temperature and pressure.
To calculate the volume of natural gas in standard cubic meter at standard pressure, you can use the ideal gas law equation: V = nRT/P, where V is the volume in standard cubic meters, n is the number of moles of gas, R is the ideal gas constant, T is the temperature in Kelvin, and P is the standard pressure. Given that standard pressure is typically defined as 1 atmosphere or 101.325 kPa, you can plug in these values along with the temperature and number of moles of gas to calculate the volume of natural gas in standard cubic meter at standard pressure.
1000 litres = 1 cubic metre: of LPG or air or concrete.
It depends on the size, its material, how it was fabricated, its wall thickness, it working history, and how fast the pressure is applied. Typically any given pipe is rated with a "working pressure", which is "usually" 1/4 the "burst pressure".
That depends on the pressure and temperature of the air in the cubic meter. Any time you change the pressure or the temperature of a gas, you change the number of molecules in one cubic meter of it.
When it is at a lower pressure or a higher temperature.
That depends on the mass, pressure, and temperature of the air in the cubic meter.
The quotient of (its absolute temperature)/(its pressure) decreases by half.
Because it doesn't say neither the temperature, the pressure or the humidity of the air. You need to know both the temperature, the pressure and the humidity of the air to say anything about the mass of one cubic meter of air.
To convert pressure units from pascals to joules, you can use the formula: 1 Pascal 1 Joule per cubic meter. This means that the pressure in pascals is equivalent to the energy density in joules per cubic meter.
One meter of head is approximately equal to 0.145 psi. This conversion is based on the density of water and the acceleration due to gravity. Specifically, 1 meter of water column exerts a pressure that can be converted using the formula: pressure (psi) = height (meters) × 0.4335. Thus, for 1 meter, the pressure is roughly 0.145 psi.
The weight of CO2 in one cubic meter of gas at standard temperature and pressure (STP) is approximately 1.98 kilograms. This value can vary slightly depending on temperature and pressure conditions, but under typical conditions, CO2 has a density of about 1.98 kg/m³.
Depending on the temperature, but assuming atmospheric pressure, between 67088 and 69998 kilograms.
To convert from parts per million (ppm) to micrograms per cubic meter (μg/m³), you need to know the molecular weight of the substance in consideration. Use the formula: μg/m³ = ppm * (molecular weight) * 24.45. This formula assumes typical conditions of temperature and pressure.
Nm3 is a measure for volume of gases, in cubic meter, under special conditions of pressure (1 atm) and temperature ( zero degrees centigrade). The name for this unity is Normal Cubic Meter. It is not Newton meter cubed.
Yes, 1 cubic meter of LPG is equal to approximately 1000 liters of LPG at standard temperature and pressure. However, the exact conversion may vary slightly depending on factors such as temperature and pressure.