GALENA
Lead is considered a primary pollutant when it is directly emitted into the environment, such as from industrial processes or gasoline combustion. However, it can also become a secondary pollutant through chemical reactions in the atmosphere, leading to the formation of lead compounds in the air.
If you mix a primary color with a secondary color, you will typically get a tertiary color. Tertiary colors are created by mixing a primary and a secondary color together.
Secondary colors are created by mixing two primary colors together. For example, mixing red and blue creates purple, mixing blue and yellow creates green, and mixing red and yellow creates orange. These secondary colors are intermediate colors on the color wheel that result from combining primary colors.
They are secondary colors because they can be created by mixing the primary colors. The secondary colors are purple, green, and orange. These aren't just considered the secondary colors, they are the official secondary colors. The always have been and they always will. Answer The three primary colors are red, green and blue. When the primary colors are mixed, they assemble three secondary colors, which are: Yellow. Cyan. Magenta.
Yes it is a secondary color. The primary colors are blue, red, yellow
primary and secondary demand
Primary Means, it is individual there is no dependence, But Secondary will allays depends on Primary, If you want to do Secondary, you should complete primary first, There is no precondition to primary, but for Secondary Primary is the Precondition, first you should do primary, then only you are able to do secondary.
Voltage on primary/Primary turns = Voltage on secondary/Secondary turns
primary and secondary coilsAnswerPrimary and secondary windings.
Primary is IgM and secondary is IgG
i am asking, if i knew i would not ask
trachea- primary bronchi- secondary bronchi- tertiary bronchi- bronchiole- alveoli
Secondary
secondary
The current in the secondary when the voltage is twice the primary will be one half of the primary. The current in the primary when the voltage is twice the secondary will be twice the secondary.
The turns ratio of Primary / Secondary tells you have the voltage and current will be changed. The secondary current will be (primary turns/secondary turns) times the primary current, and the secondary voltage will be (secondary turns / primary turns) times the primary voltage.CommentThe above answer is a little misleading, because the secondary current is determined by the load, and not by the transformer's ratio. It would, therefore, be more accurate to say that the primary current would be equal to the secondary current times the (primary turns/secondary turns) -i.e. not the other way around!
Secondary consumers - primary consumers are the herbivores