0
What else can I help you with?
Can we carry out an iodometric titration using a potentiometer?
No, iodometric titration is typically done using a standard titration setup with a burette and indicator to detect the endpoint. A potentiometer measures the voltage produced in a system, making it unsuitable for this type of titration.
What is Fajan's method of argentometric titration?
Fajan's method of argentometric titration involves the use of potassium chromate as an indicator to detect the end point of a titration between silver ions and chloride ions. The indicator changes color from yellow to red when all the chloride ions have reacted with the silver ions, marking the end point of the titration.
What is the purpose of adding nitrobenzene in volhard titration?
Nitrobenzene is added in volhard titration as an indicator to detect the endpoint of the titration between chloride ions and silver ions. It forms a red-brown complex with excess silver ions which marks the end point of the titration.
Why is important that the indicator is present in the solution during the course of titration?
the reason why a indicator is important in some titration is to show a change in the solution. for example as a solution runs from acidic to basic the indicator may turn a different color. but this is the reason why it is important inmost experiments.
What is example of indicator in EDTA titration?
The indicator commonly used in EDTA titrations is Eriochrome Black T. It changes color from wine-red to blue when transitioning from calcium ions to magnesium ions, helping to detect the endpoint of the titration accurately.
Can we carry out an iodometric titration using a potentiometer?
No, iodometric titration is typically done using a standard titration setup with a burette and indicator to detect the endpoint. A potentiometer measures the voltage produced in a system, making it unsuitable for this type of titration.
What is Fajan's method of argentometric titration?
Fajan's method of argentometric titration involves the use of potassium chromate as an indicator to detect the end point of a titration between silver ions and chloride ions. The indicator changes color from yellow to red when all the chloride ions have reacted with the silver ions, marking the end point of the titration.
What is the purpose of adding nitrobenzene in volhard titration?
Nitrobenzene is added in volhard titration as an indicator to detect the endpoint of the titration between chloride ions and silver ions. It forms a red-brown complex with excess silver ions which marks the end point of the titration.
Why is important that the indicator is present in the solution during the course of titration?
the reason why a indicator is important in some titration is to show a change in the solution. for example as a solution runs from acidic to basic the indicator may turn a different color. but this is the reason why it is important inmost experiments.
Describe a method to visually detect the end point of a titration without the use of instruments?
The method used most often in chemistry labs is by use of a pH indicator in the sample being titrated. When you reach the titration point, the indicator will change colors, demonstrating the end point of the titration.
What is example of indicator in EDTA titration?
The indicator commonly used in EDTA titrations is Eriochrome Black T. It changes color from wine-red to blue when transitioning from calcium ions to magnesium ions, helping to detect the endpoint of the titration accurately.
What is meant by External Indicator used in titration?
An external indicator in titration is a substance that is added in small amounts to the analyte solution during titration to signal the endpoint of the reaction. It changes color at or near the equivalence point, making it easier for the observer to detect when the reaction is complete. Common examples of external indicators include phenolphthalein and methyl orange.
Why is phenolphthalein used in the titration experiment?
Phenolphthalein is used in titration experiments as an acid-base indicator because it changes color at a specific pH range (pH 8.2-10.0), making it easy to visually detect the endpoint of the titration when the solution changes from acidic to basic or vice versa. This helps in determining the volume of titrant needed to reach the equivalence point accurately.
Why the solution turn to pink at the end of thr titration?
The solution turns pink at the end of the titration when an indicator like phenolphthalein is used to detect the endpoint. In this case, phenolphthalein turns pink in basic solutions, indicating that the acid has been neutralized and the endpoint of the titration has been reached.
Why you use muraxide as indicator in EDTA titration?
Muraxide is used as an indicator in EDTA titrations because it forms a distinct wine-red color complex with metal ions, making it easy to detect the endpoint of the titration. Muraxide is specific for detecting the endpoint of calcium and magnesium titrations when using EDTA as the titrant.
What methods can be used to find the equivalence point in a titration experiment?
In a titration experiment, the equivalence point can be found using methods such as using a pH meter to detect a sudden change in pH, using an indicator that changes color at the equivalence point, or using a titration curve to identify the point of neutralization.
What is role of muraxid in edta titrations?
Muraxid is used as an indicator in EDTA titrations to detect the endpoint of the titration when all the metal ions have been complexed by EDTA. Muraxid forms a colored complex with uncomplexed metal ions, indicating the endpoint of the titration.
